No products in the cart.
Arduino Uno R3 – SMD MCU – Without Cable
- Arduino Uno R3 SMD version
- Based on Atmel AVR Atmega328-AU MCU
- Clock: 16 Mhz
- Flash: 32 KB
- SRAM: 2 KB
- EEPROM: 1 KB
₹381.20₹399.00Incl. of GSTArduino Uno R3 – SMD MCU – Without Cable
₹381.20₹399.00Incl. of GSTVL53L0X TOF BASED LIDAR Laser Distance Sensor
- Emitter: 940 nm laser VCSEL
- Measures absolute range up to 2 m
- Ranging sensor with advanced embedded micro controller
- Operating voltage 3.3V to 5V
- Communication Protocol: I2C
₹159.00₹270.00Incl. of GSTVL53L0X TOF BASED LIDAR Laser Distance Sensor
₹159.00₹270.00Incl. of GSTESP32 DevKitC With UFL Connector
- Wifi Protocols: 802.11 b/g/n
- Wi-Fi +BT +BLE MCU Module
- On Chip Hall Sensor
- Integrated Crystal of 40 Mhz
- Integrated SPI Flash of 4 MB
- Recommended Voltage: 5V
₹481.00₹509.29Incl. of GSTESP32 DevKitC With UFL Connector
₹481.00₹509.29Incl. of GST6.3mm Diameter Nozzle – 1 Feet Length
- Diameter: 6.3mm
- Length: 1 Feet
- 1 Qty = 1 Feet
₹5.90 Incl. of GST6.3mm Diameter Nozzle – 1 Feet Length
₹5.90 Incl. of GSTUSB to Rs485 Converter Module
- Industrial Grade RS485 to USB Converter Module
- Automatic Data Flow Control
- Baud rate: 300 – 9216000bps with auto detect
- Supports Multipoint communication, upto 32 RS485 Interace devices
- Interface Protection: TVS Diode, USB Self Recovery Protection
₹185.00₹215.00Incl. of GSTUSB to Rs485 Converter Module
₹185.00₹215.00Incl. of GSTLM386 Mono Audio Amplifier Module
- Onboard LM386 Chip
- On-board 10K variable resistor, you can adjust the volume of the enlarged
- Onboard power indicator
- The chip pin leads, can be directly input audio signal
- Wide supply voltage range: 4V–12V or 5V–18V
- Low quiescent current drain: 4mA
₹43.70₹50.74Incl. of GSTLM386 Mono Audio Amplifier Module
₹43.70₹50.74Incl. of GSTA4988 Stepper Motor Driver Module
- Load Supply Voltage (VBB): 8V-35V
- Output Current: ±2A(max)
- Logic Input Voltage: –0.3V to 5.5V
- Logic Supply Voltage: –0.3V to 5.5V
- Operating Ambient Temperature: –20ºC to 85ºC
₹68.00₹84.00Incl. of GSTA4988 Stepper Motor Driver Module
₹68.00₹84.00Incl. of GST1 Litre Bottle with Leak Proof Connector
- Capacity: 1.1 Litre
- Leak Proof Connector attached
- Push To Fit Connection with Pipe
- Cap Diameter: 38 mm
₹92.59 Incl. of GST1 Litre Bottle with Leak Proof Connector
₹92.59 Incl. of GSTHi Link HLK PM03 – For 3.3V 1A – AC to DC Power Supply Module
- Universal Input Voltage Range: 90 to 265 VAC
- Output Voltage: 3.3 Vdc
- Max Output Current: 1 A
- Meets UL, CE certification standards
- Designed to meet EMC and Safety Testing requirements
₹220.60₹271.40Incl. of GSTHi Link HLK PM03 – For 3.3V 1A – AC to DC Power Supply Module
₹220.60₹271.40Incl. of GSTNu-Link ICP Programmer – Nuvoton Compatible
- Support KEIL, IAR, CoIDE, and other IDE tools.
- ICP programming Voltage: 3.3V
- Programmable output VDD: 1.8V, 2.5V, 3.3V, 5.0V
- Support Device : NuMicro Families / N76E003 /N76E616 /N76E885 /MS51FB9AE Series etc.
- Support memory read and write, terminal emulation and serial debug output while program is running.
₹1,389.00₹1,549.00Incl. of GSTNu-Link ICP Programmer – Nuvoton Compatible
₹1,389.00₹1,549.00Incl. of GSTDIY Sanitizer Dispenser Module
- Usable with Ultra Sonic, IR Sensor, and other sensor types
- Micro controller Based Design
- Default Detection Distance: < 6 inches
- Default Trigger Time: 200 mS
- Input Voltage: 12 VDC
- Max Current Consumption: 1 A
- Output Voltage: 12 VDC
₹295.00 Incl. of GSTDIY Sanitizer Dispenser Module
₹295.00 Incl. of GSTHi Link HLK 5M12 – 12V 450mA – AC to DC Power Supply Module
- Output Voltage: 12 VDC
- Output Current: 450 mA
- Universal Input Voltage Range: 85 to 264 VAC
- CE and ROHS Certified
- Small Size
- Meets IP65 Standards
₹258.00₹283.20Incl. of GSTHi Link HLK 5M12 – 12V 450mA – AC to DC Power Supply Module
₹258.00₹283.20Incl. of GST