No products in the cart.
2517 4 Pin Single Side Female Cable – 14/38 Gauge – 10cm Length – JST SM Compatible
- Connector Type: 4 Pin Female JST-SM 2517
- Wire Gauge: 14/38
- Cable Length: 10cm
- Connector Pitch: 2.54mm
- Current Rating: 3 A
- Voltage Rating: 250V
₹9.80 Incl. of GST2515 8 Pin JST XH Female Cable – Double Side Female – 7/40 Gauge – 11 inch Length
- Connector Type: 8 pin JST XH female connectors on both ends
- Pitch: 2.54 mm
- Wire Gauge: 7/40
- Cable Length: 11 inch
₹21.00 Incl. of GST680uF 25V SMD Electrolytic Capacitor – 10 x 10.5 mm – 20%
- Capacitance: 680uF
- Voltage: 25V
- Type: Aluminum Electrolytic SMD
- Capacitor dimensions (each): 10 x 10.5 mm
₹12.00 Incl. of GST680uF 25V SMD Electrolytic Capacitor – 10 x 10.5 mm – 20%
₹12.00 Incl. of GSTESP32-PICO-D4 MCU IC
- Wi-Fi :802.11 b/g/n (802.11n up to 150 Mbps)
- Bluetooth: Bluetooth V4.2 BR/EDR and Bluetooth LE specification
- On Chip Hall sensor
- Integrated crystal: 40MHz
- Integrated SPI flash: 4MB
- Operating voltage/Power supply: 3.0 V ~ 3.6 V
₹265.00 Incl. of GSTESP32-PICO-D4 MCU IC
₹265.00 Incl. of GSTScrew Terminal 2 pin Right Angle 5.08mm Pitch
- Screw Terminal 2Pin Right Angle from Vital
- 5.08mm Pitch
- Rated at 12A @ 300V
- Multiple Screw Terminals can be stacked
₹21.24 Incl. of GSTScrew Terminal 2 pin Right Angle 5.08mm Pitch
₹21.24 Incl. of GSTRF Cable 1.13mm UFL Female to Open Tinned End – 10cm Length
- Connector Type: UFL Female to Open Tinned End
- Cable Type: 1.13mm Co-axial cable
- Length: 10CM
₹24.00 Incl. of GSTRF Cable 1.13mm UFL Female to Open Tinned End – 10cm Length
₹24.00 Incl. of GSTMAX30100 Pulse Oximeter Heart Rate Sensor Module
- It is an integrated pulse oximetry and heart rate monitor sensor solution.
- Integrated LEDs, Photo Sensor, and High-Performance Analog Front -End
- High Sample Rate Capability
- Fast Data Output Capability
- I2C interface plus INT pin
₹115.00 Incl. of GSTMAX30100 Pulse Oximeter Heart Rate Sensor Module
₹115.00 Incl. of GSTXL6009 Step Up Module with Display
- Input Voltage: 3 ~ 32 V
- Output Voltage: 5 ~ 40V
- Transfer Efficiency: 94%
- Operating Temperature: -40°C to +85°C
- The booster works below 5V normally, but the display does not work
₹249.80₹280.84Incl. of GSTXL6009 Step Up Module with Display
₹249.80₹280.84Incl. of GSTCCS811 Digital Gas Sensor
- Ultra-low power consumption can be used in battery-operated equipment
- High sensitivity, fast heating
- The intelligent algorithm calculates TVOC / eCO2 values
- Output I2C signal, direct communication with the main system
₹1,795.00₹2,100.40Incl. of GSTCCS811 Digital Gas Sensor
₹1,795.00₹2,100.40Incl. of GSTFFC FPC 50 pin Connector – 0.5mm Pitch – SMD
- Number of Pins: 50
- Mounting Type: SMD
- Pitch:0.5mm
- Rated Current: 0.5A
- Working Voltage: 50V
- Contact Resistance: 30m Ω
- Operating Temperature Range: -20°C to +85°C
₹24.70 Incl. of GSTFFC FPC 50 pin Connector – 0.5mm Pitch – SMD
₹24.70 Incl. of GST201 8 pin Female Connector – 2mm Pitch – PH Series Compatible
- Current Rating: 2 A
- Voltage Rating: 100 V
- Pitch: 2 mm
- Pins: 8
- Type: Female Connector
- Compatible with JST PH 2mm
₹0.65 Incl. of GST201 8 pin Female Connector – 2mm Pitch – PH Series Compatible
₹0.65 Incl. of GSTAHT25 Temperature and Humidity Sensor Module
- Temperature Range: -40°C to +85°C
- Humidity Range: 0% to 100% RH
- Accuracy: ±0.3°C (Temperature), ±2% RH (Humidity)
- Power Supply: 2.2V to 5.5V
- Interface: I2C
₹121.00 Incl. of GSTAHT25 Temperature and Humidity Sensor Module
₹121.00 Incl. of GST