Nu-Link ICP Programmer – Nuvoton Compatible
- Support KEIL, IAR, CoIDE, and other IDE tools.
- ICP programming Voltage: 3.3V
- Programmable output VDD: 1.8V, 2.5V, 3.3V, 5.0V
- Support Device : NuMicro Families / N76E003 /N76E616 /N76E885 /MS51FB9AE Series etc.
- Support memory read and write, terminal emulation and serial debug output while program is running.
₹1,389.00₹1,549.00Incl. of GSTNu-Link ICP Programmer – Nuvoton Compatible
₹1,389.00₹1,549.00Incl. of GST
Resistor 56K Ohms 2W 5% MOR – TH
- Resistance: 56KΩ
- Power Rating: 2 watts
- Tolerance: 5%
- Maximum Operating Voltage: 500 volts
- Construction: Through-hole with wire leads
- Material: Metal Oxide
₹2.75 Incl. of GSTResistor 56K Ohms 2W 5% MOR – TH
₹2.75 Incl. of GSTA4988 Stepper Motor Driver Module
- Load Supply Voltage (VBB): 8V-35V
- Output Current: ±2A(max)
- Logic Input Voltage: –0.3V to 5.5V
- Logic Supply Voltage: –0.3V to 5.5V
- Operating Ambient Temperature: –20ºC to 85ºC
₹68.00₹84.00Incl. of GSTA4988 Stepper Motor Driver Module
₹68.00₹84.00Incl. of GSTAQY211EH – 30V 1A Solid State Relay – DIP-4
- Load Output Voltage: 30V
- Load Output Current: 1A
- Total Power Dissipation: 550mW
- Operating Temperature: -40°C to 85°C
- Turn ON Time: 5ms(max)
- Turn OFF Time: 1ms(max)
₹148.00 Incl. of GSTAQY211EH – 30V 1A Solid State Relay – DIP-4
₹148.00 Incl. of GSTM3 x 16 SS 304 Allen Cap Bolt – Socket Head – 16mm Length
- Diameter (D): 3mm (M3)
- Length (L): 16mm
- Thread Pitch: 0.5mm
- Head Diameter (HD): Approx. 5.5mm
- Head Height (HH): Approx. 3mm
- Material: Stainless Steel SS 304
₹3.75 Incl. of GSTM3 x 16 SS 304 Allen Cap Bolt – Socket Head – 16mm Length
₹3.75 Incl. of GSTGlass Fuse 20x5mm – 5A – Fast Acting – Protectron
- Glass Fuse 20 x 5 mm
- Fast Acting Fuse
- Current Rating: 5A @ 250V
- Make: Protectron
- High build Quality
₹4.65 Incl. of GSTGlass Fuse 20x5mm – 5A – Fast Acting – Protectron
₹4.65 Incl. of GSTM3 x 20 SS 304 Allen Cap Bolt – Socket Head – 20mm Length
- Diameter (D): 3mm (M3)
- Length (L): 20mm
- Thread Pitch: 0.5mm
- Head Diameter (HD): Approx. 5.5mm
- Head Height (HH): Approx. 3mm
- Material: Stainless Steel SS 304
₹3.95 Incl. of GSTM3 x 20 SS 304 Allen Cap Bolt – Socket Head – 20mm Length
₹3.95 Incl. of GSTDRV8825 Stepper Driver Module
- Supply Voltage: 8.2 – 42 VDC
- Continuous motor drive output current: 2.5A (max)
- Logic voltage: 2.5V to 5V
- Micro step resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32
- Operating ambient temperature range: -40°C to 85°C
₹117.50₹230.00Incl. of GSTDRV8825 Stepper Driver Module
₹117.50₹230.00Incl. of GSTResistor 22.1K Ohms 22K1 1% 1/10W SMD 0603
- SMD 0603 Package
- Resistance: 22.1K Ohms
- Tolerance: 1%
- Also Denoted as 22K1 Ohms
₹0.20 Incl. of GSTResistor 22.1K Ohms 22K1 1% 1/10W SMD 0603
₹0.20 Incl. of GST20 Pin FRC Female Connector-10×2 Pin – 1.27 mm Pitch
- 20 pin – 10×2 FRC Connector
- Connector Pitch: 1.27 mm
- Compatible Cable: 20 pin FRC Cable with 1.27mm Pitch
₹42.00 Incl. of GST20 Pin FRC Female Connector-10×2 Pin – 1.27 mm Pitch
₹42.00 Incl. of GSTPN532 NFC RFID Read Write Module Kit V3
- Operating Voltage: 3.3V – 24V (TTL level for I2C/UART), 3.3V (TTL for SPI)
- Interface: I2C, SPI, High-Speed UART (HSU)
- Communication Distance: 5cm to 7cm (NFC and RFID)
- PCB Antenna: Built-in, providing 4cm to 6cm communication range
- Works as an NFC device or RFID reader/writer
₹268.00 Incl. of GSTPN532 NFC RFID Read Write Module Kit V3
₹268.00 Incl. of GSTESP32 CAM Development Board – With OV2640 2 MP Camera
- Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Support OV2640 and OV7670 cameras with built-in flash
- Support TF card
₹552.00 Incl. of GSTESP32 CAM Development Board – With OV2640 2 MP Camera
₹552.00 Incl. of GST
Enjoy Blazing Fast Shipping on All Orders At No Extra Cost !!!