Automatic Hand Sanitizer Dispenser Kit
- Automatic Sanitizer Dispenser Kit
- Operating Voltage: 12V DC
- Current Required: 400 mA Max, 100 mA Continuous
- Sanitizer Output: 2-3 ml on each trigger
- Buzzer Plays on a trigger
- Alternate Product : Solderless Sanitizer Dispenser Kit
₹1,119.82₹1,534.00Incl. of GSTAutomatic Hand Sanitizer Dispenser Kit
₹1,119.82₹1,534.00Incl. of GST
MP1495 Multi Output Step Down Module – 3A
- Wide 4.5V-to-16V Operating Input Range
- Output Voltage VOUT: 0.8V to VIN-3V
- Multiple Output Options : 1.25V, 1.5V, 1.8V, 2.5V, 3.3V, 5V
- Operating Junction Temp. (TJ). -40°C to +125°C
- Fixed 500kHz Switching Frequency
₹72.00 Incl. of GSTMP1495 Multi Output Step Down Module – 3A
₹72.00 Incl. of GSTTB6600 Stepper Motor Driver Module
- Output Current: 0.5-4.0A
- Control Signal: 3.3~24V
- Power (MAX): 160W
- Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
- Temperature: -10～45℃
- Humidity: No Condensation
₹393.00₹571.12Incl. of GSTTB6600 Stepper Motor Driver Module
₹393.00₹571.12Incl. of GSTEthernet Module ENC28J60 – Big Size
- Ethernet Module ENC28J60 Big Size
- SPI Interface
- 1×10 connector, can be easily mounted with the MCU
- Built-in isolation transformer RJ45 connectors HR911105A
- Power LED
- Single Supply: +3.3 V
- 25Mhz Crystal
₹328.00 Incl. of GSTEthernet Module ENC28J60 – Big Size
₹328.00 Incl. of GSTNodeMCU ESP8266 CP2102 Wifi Development Board
- Based on ESP8266-12F/12E
- Easy to use wifi development board with Lua Scripting
- Open source firmware and development kit
- Input Voltage: 5V to 12V
- Built in USB to TTL Serial using CP2102
₹270.50 Incl. of GSTNodeMCU ESP8266 CP2102 Wifi Development Board
₹270.50 Incl. of GSTCNC Shield V3 module
- Runs on 12-36VDC
- GRBL 0.9 compatible
- 4-Axis support
- Compact design
- 2 x End stops for each axis (6 in total)
₹106.00₹129.00Incl. of GSTCNC Shield V3 module
₹106.00₹129.00Incl. of GSTCC1101 433mhz Module
- Frequency : 433MHz
- Antenna Type : spring /IPEX/ external
- Chipset : CC1101
- Communication Interface : SPI
- Current : 29mA
- Maximum Power : 10mW
- Voltage : 1.8-3.6V
₹235.00 Incl. of GSTCC1101 433mhz Module
₹235.00 Incl. of GSTMirror Touch Sensor AC – 3 Colour Touch + Dimming
- Functions : Tricolor + Dimming
- Input Voltage: 110V – 240VAC
- Max Load: 12VDC 1A 12W Max
- LED Indicator: Blue (ON Mode) , White (OFF Mode)
₹309.00 Incl. of GSTMirror Touch Sensor AC – 3 Colour Touch + Dimming
₹309.00 Incl. of GSTXL6009 Step Up Module with Display
- Input Voltage: 3 ~ 32 V
- Output Voltage: 5 ~ 40V
- Transfer Efficiency: 94%
- Operating Temperature: -40°C to +85°C
- The booster works below 5V normally, but the display does not work
₹249.80₹280.84Incl. of GSTXL6009 Step Up Module with Display
₹249.80₹280.84Incl. of GSTEC200U-CN 4G + 2G LTE Development Board – Quectel – Without GNSS
- Input Supply: 5V-12V DC, 2A
- DATA Transfer LTE(Mbps): 10 Downlink / 5 Uplink
- Power consumption: 300mA; <25mA (sleep mode)
- SIM Holder: Nano SIM
- Quectel EC200U-CN chip on-board
- Supports 4G + 2G
₹1,639.00 Incl. of GSTEC200U-CN 4G + 2G LTE Development Board – Quectel – Without GNSS
₹1,639.00 Incl. of GSTESP32-DevKitC ESP32-WROOM-32UE Development board
- Processor: Xtensa dual-core 32-bit LX6, up to 240 MHz
- Flash Memory: 4 MB
- Wi-Fi Standard: 802.11b/g/n (2.4 GHz), up to 150 Mbps data rate
- Bluetooth: V4.2 BR/EDR and LE
- Operating Voltage: 5V
- Operating Temperature Range: -40°C to 85°C
₹510.00 Incl. of GSTESP32-DevKitC ESP32-WROOM-32UE Development board
₹510.00 Incl. of GSTMAX30100 Pulse Oximeter Heart Rate Sensor Module
- It is an integrated pulse oximetry and heart rate monitor sensor solution.
- Integrated LEDs, Photo Sensor, and High-Performance Analog Front -End
- High Sample Rate Capability
- Fast Data Output Capability
- I2C interface plus INT pin
₹115.00 Incl. of GSTMAX30100 Pulse Oximeter Heart Rate Sensor Module
₹115.00 Incl. of GST
Get Lightning Fast dispatch on all orders without any extra charge. And avail GST credit on all your purchases.