No products in the cart.
Roll over image to zoom in
Click to open expanded view
Solderless Sanitizer Dispenser Kit
GST Credit of ₹134.82available.
- Solderless Sanitizer Dispenser Kit
- Easy to assemble
- Pre Programmed
- Contains all necessary items except enclosure
- Programmable as per need via onboard ISP Header
This is a Solderless Sanitizer Dispenser Kit. The kit contains DIY Sanitizer Dispenser Controller Module, 1 litre bottle with leak proof connector, 6.3 mm pipe, a buzzer, solenoid valve, and a 12 VDC adapter.
This kit is a Solder Less Kit, which means that the you do not need to solder any parts while making this kit into a Automatic Sanitizer Dispenser. You can do it even if you do not know soldering.
The working of this Automatic Hand Sanitizer Dispenser is very simple. When the user puts the hand below the sensor, the sanitizer comes out of the solenoid valve. On each operation, 2-3 ml of sanitizer comes out of the nozzle.
This kit is very cheap. And is very easy to hook up and making it running.
We also have a detailed guide on how to connect it here.
The bottle in the Solderless Sanitizer Dispenser Kit comes with Leak Proof Connector. The solenoid valve and the leak proof connector, both are of push fit type. So, it allows us to directly push the 6.3 mm pipe onto both of them without worrying for any leaks.
- Operating Voltage: 12 VDC
- Current Requirements: Max 400 mA, continuous 50mA
- Liquid Output: 2-3 ml on each trigger
- Detection Range: 6 inches
- Buzzer will play whenever user puts hand below the sensor
- Solder Less Kit
This Solderless Sanitizer Dispenser Kit is very easy to connect. You need to connect the Ultra Sensor to the board using a 4 pin JST XH Connector which is pre soldered with the Ultra Sonic Sensor. The Adapter DC Jack can be inserted into the input DC Jack on the board.
The Solenoid Valve and Buzzer both have a common Screw Terminal for connection to the board. The Negative Wire of Solenoid Valve and Buzzer needs to be insert into Screw Terminal with Negative (-) Sign. The Positive Wire of Solenoid And Buzzer should be inserted into Positive (+) Sign into Screw Terminal.
- DIY Sanitizer Dispenser Module x 1
- 12 V Buzzer
- Pre Soldered (with 4 Pin Connector) Ultra Sonic Sensor x 1
- 1 Litre Bottle with Leak Proof Connector x 1
- Solenoid Valve x 1
- 12V 1A Adapter x 1
- 6.3 mm Pipe x 6 inches
- Cable Tie x 3
Let’s fight Corona Together.