No products in the cart.
Roll over image to zoom in
Click to open expanded view
Arduino Nano R3 CH340G Compatible Board
GST Credit of ₹46.68available.
- Arduino Nano Compatible Board
- Operating Voltage: 5V
- Input Voltage: 7V to 12V
- Peripherals: 1 x USART, 1 x SPI, 1 x I2C
- Digital I/O pins: 22 (out of which 6 can be used for PWM output)
- Analog Input Pins: 6
This board is fully compatible with Arduino Nano. It is based on the ATmega328p-AU from the atmel, the SMD version of one used in Arduino Uno. The advantage of this module, is that is very small in size as compared to Arduino Uno. It has integrated USB, and is breadboard friendly. It does not have any power jack, but still senses, and switch to higher potential power source.
Arduino Nano can be said to be a smaller version of Arduino Uno, as its using the same MCU with smaller package. It also provides same functions as provided by Arduino Uno. Apart from that, it has 8 analog input pins instead of 6 analog inputs in Arduino Uno. It also has pinout for the programmer to be connected to the board directly, in case USB is not used for programming. It also has 1 x USART, 1 x SPI, 1 x I2C peripherals.
The Arduino Nano has 2 digital interrupt pins, and almost all pins can be used for pin change interrupt. Any pin can wake up MCU on interrupt from sleep mode. It works on 16 Mhz frequency.
- Micro controller: ATMega328p-AU
- Input Voltage: 7 V to 12 V
- Operating Voltage: 5 V
- Flash Memory: 32 KB (out of which 2 KB used by bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 Mhz
- Analog Input Pins: 8
- Digital I/O pins: 22
- PWM pins: 6
- Max Current Per I/O pins: 40 mA
- Onboard 5V Regulator