Espressif ESP32-S3-DevKitM-1-N16R8 Development board – ESP32-S3-WROOM-1-N16R8
- Microcontroller: ESP32-S3 (Dual-core, 240 MHz)
- Module: ESP32-S3-WROOM-1-N16R8 (16MB Flash, 8MB PSRAM)
- Wireless Support: 2.4 GHz Wi-Fi, Bluetooth Low Energy (BLE)
- Power Supply: 5V via Micro-USB
- Voltage Regulation: 5V to 3.3V LDO for stable board operation
- GPIO Pins: 34 I/O pins, including UART, SPI, I2C, PWM, ADC, DAC, and more
- Buttons: Boot and Reset buttons for firmware flashing and system reset
- LEDs: RGB LED (GPIO38) and 3.3V Power On LED
- USB Interface: USB-to-UART bridge for flashing and debugging
- Debugging: Supports JTAG debugging interface
- Form Factor: Compact development board with pin headers for easy integration
₹645.00 Incl. of GSTEspressif ESP32-S3-DevKitM-1-N16R8 Development board – ESP32-S3-WROOM-1-N16R8
₹645.00 Incl. of GSTSI7021 Temperature And Humidity Sensor Module
- Uses the I2C interface
- Typical humidity accuracy of ±2%
- Typical temperature accuracy of ±0.3C
- Operates from 0 to 100% humidity but this sensor isn’t recommended for harsh environments where it could come in contact with water (such as rain)
- 3.3V sensor – use inline logic level converters or 10kΩ resistors to limit 5V signals
- Only one Si7021 sensor can reside on the I2C bus at a time
₹631.00 Incl. of GSTSI7021 Temperature And Humidity Sensor Module
₹631.00 Incl. of GSTESP32-C6-DevKitC-1 Development Board – ESP32-C6-wroom-1(U) Compatible
- Based on ESP32-C6-WROOM-1(U)
- Integrates complete Wi-Fi, BLUETOOTH LE, Zigbee, and Thread functions
- USB-to-UART bridge provides transfer rates up to 3Mbps
- On-Board RGB LED
- Require USB-A to USB-C cable
₹620.00 Incl. of GSTESP32-C6-DevKitC-1 Development Board – ESP32-C6-wroom-1(U) Compatible
₹620.00 Incl. of GST12V 2 Channel WiFi Relay module
- Relay Channel: 2
- Input/Trigger Voltage (VDC): 12V DC
- Switching Voltage (VAC):250@10A
- Switching Voltage (VDC):30@10A
- Wireless relay module allows to control anything using mobile app
- Has Wifi And Hotstop Mode
- LEDs to indicate different modes and status of module
- Reserved UART debug interface and MCU download port for programming
- Only works when Mobile and Module connected to same wifi network
₹599.00₹660.00Incl. of GST12V 2 Channel WiFi Relay module
₹599.00₹660.00Incl. of GSTArduino Uno R3 Compatible Board With Cable – DIP Version
- Arduino Uno DIP Version Compatible Module
- 32 KB Flash
- 2 KB SRAM
- 1 KB EEPROM
- Frequency: 16 Mhz
₹590.00 Incl. of GSTArduino Uno R3 Compatible Board With Cable – DIP Version
₹590.00 Incl. of GSTHTC 830L+ Digital Multimeter
- 3 1/2 Digit Manual Multimeter
- Power: AAA 1.5 x 2
- Display Backlight
- CAT II 600V
- 1,999 Count
- Data Hold
₹587.00 Incl. of GSTHTC 830L+ Digital Multimeter
₹587.00 Incl. of GSTSGP41 Air Quality Sensor for VOC and NOx Measurements – IC – DFN
- Operating Supply Voltage: 3.3V
- Current Rating: 3mA
- Package/Case: DFN-6
- I2C interface with digital output signals
- MOx based gas sensor for air quality applications
- Make: Sensirion
₹585.00 Incl. of GSTSGP41 Air Quality Sensor for VOC and NOx Measurements – IC – DFN
₹585.00 Incl. of GST4WD Cardboard Robot Kit – Unassembled
- Frame or chassis: a basic frame or platform for attaching the motors and other components
- Motors: 4 motors, one for each wheel, that provide movement and control
- Wheels: 4 wheels that attach to the motors
- Motor Gear Ratio 1:48
- Wheel Diameter: 65 mm
- Motor Voltage: 5V
₹570.00 Incl. of GST4WD Cardboard Robot Kit – Unassembled
₹570.00 Incl. of GSTVL53L1X LASER Ranging Module – Time of Flight Distance Sensor
- Emitter: 940 nm invisible laser (Class1)
- Up to 400 cm distance measurement
- Up to 50 Hz ranging frequency
- Typical full field-of-view (FoV): 27 °
- Fast and accurate long distance ranging
- Operating voltage: 2.8 – 3.3V
₹570.00₹604.00Incl. of GSTVL53L1X LASER Ranging Module – Time of Flight Distance Sensor
₹570.00₹604.00Incl. of GST2.8 Inch TFT LCD Non-Touch Screen Module 240×320 Resolution – SPI Interface
- Display Size: 2.8 inches with a 240×320 pixel resolution.
- Driver IC: ST7789
- Color Depth: 262K/65K
- Interface: SPI communication interface.
- Input Voltage (V): 3.3 to 5
- Display Type: TFT Non-Touch
- SD Card Support
₹561.00 Incl. of GST2.8 Inch TFT LCD Non-Touch Screen Module 240×320 Resolution – SPI Interface
₹561.00 Incl. of GSTESP32 CAM Development Board – With OV2640 2 MP Camera
- Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Support OV2640 and OV7670 cameras with built-in flash
- Support TF card
₹552.00 Incl. of GSTESP32 CAM Development Board – With OV2640 2 MP Camera
₹552.00 Incl. of GSTSim800L GSM GPRS Module – 2G
- SIM800L Quad Band GSM / GPRS Module
- Power Supply: 3.7 to 4.2V Rated At 2A
- Low Power Consumption: < 3 mA during sleep mode
- Max Current: 2A (During transmission bursts)
- Supports transmission of Voice, SMS, and Data (max speed 85.6 Kbps)
- Supports Serial Communication (5v tolerant)
- Suppors Micro SIM Card
₹540.99 Incl. of GSTSim800L GSM GPRS Module – 2G
₹540.99 Incl. of GST
Enjoy Blazing Fast Shipping on All Orders At No Extra Cost !!!