No products in the cart.
Magnetic Door Sensor Pair Switch – White – High Quality
- Type: Normally Open
- Compatibility: Suitable for integration with home alarm systems
- Installation: Easy to install and conceal
- Application: Perfect for doors, windows, cupboards, and sliding doors
- Security Enhancement: Provides an additional layer of security to your property
₹82.60 Incl. of GSTMagnetic Door Sensor Pair Switch – White – High Quality
₹82.60 Incl. of GSTMQ2 Smoke and Gas Detector module
- Operating Voltage is +5V
- Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and smoke.
- Analog output voltage: 0V to 5V
- Digital Output Voltage: 0V or 5V (TTL Logic)
- Preheat duration 20 seconds
- Can be used as a Digital or analog sensor
- The Sensitivity of Digital pin can be varied using the potentiometer
₹82.00 Incl. of GSTMQ2 Smoke and Gas Detector module
₹82.00 Incl. of GSTIP6505 IC – Fast Charge Buck Converter – 24W Max – Synchronous Buck Converter – Injoinic – SOIC-8
- Built-in Power MOSFET: Integrated for enhanced efficiency
- Input Voltage Surge: Handles up to 48V surge
- Input Voltage Range: 4.5V to 32V
- Output Voltage Range: 3V to 12V; supports up to 24W output power
- Fixed Line Compensation: Adjusts output voltage with increasing current to compensate for wire resistance
- Conversion Efficiency: Up to 97%
₹81.50 Incl. of GSTSMA Male to SMA Female Cable RG316 – 10cm Length
- High-Quality SMA Connectors On Both Ends
- High efficiency
- Uses RG136 Coaxial Cable
- Connector Type: SMA Male to SMA Female
- Cable Length: 10cm
₹81.50 Incl. of GSTSMA Male to SMA Female Cable RG316 – 10cm Length
₹81.50 Incl. of GST3S Lithium Battery Level Indicator For Li-po and Li-ion
- Wide application fields: lithium battery(Li-Po and Li-ion)
- Digital Color: outline red, display block blue
- Reverse Connection Protection
- Operating Temperature: 0℃~+50℃
₹81.50₹85.00Incl. of GST3S Lithium Battery Level Indicator For Li-po and Li-ion
₹81.50₹85.00Incl. of GSTFerrite Inductor 10uh 2.5 Mhz – 0805AF-103XJR_ – CoilCraft
- Inductance: 10µH ±5%
- Self-Resonant Frequency (SRF): 740 MHz
- DC Resistance (DCR): 2.2Ω max
- Current Rating (Irms): 230 mA
- Operating Temperature: -40°C to +85°C
- Make: Coilcraft
- MPN: 0805AF-103XJR_
₹81.00 Incl. of GSTFerrite Inductor 10uh 2.5 Mhz – 0805AF-103XJR_ – CoilCraft
₹81.00 Incl. of GSTSMA Male to SMA Male Cable RG316 – 10cm Length
- High-Quality SMA Connectors On Both Ends
- High efficiency
- Uses RG316 Coaxial Cable
- Connector Type: SMA Male to SMA Male
- Cable Length: 10cm
₹81.00 Incl. of GSTSMA Male to SMA Male Cable RG316 – 10cm Length
₹81.00 Incl. of GSTRP2040 MCU – Raspberry Pi – QFN-56
- Dual ARM Cortex-M0+ @ 133MHz
- Input supply Voltage: 3.7V(max)
- Package: QFN-56
- 264kB on-chip SRAM in six independent banks
- Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
₹81.00 Incl. of GSTRP2040 MCU – Raspberry Pi – QFN-56
₹81.00 Incl. of GSTDHT11 Temperature and Humidity Sensor Module
- Power Supply: 3.3~5.5V DC
- Output: 4 pin single row
- Measurement Range: Humidity 20-90%RH, Temperature 0~50℃
- Accuracy: Humidity +-5%RH, Temperature +-2℃
- Resolution: Humidity 1%RH, Temperature 1℃
₹80.50 Incl. of GSTDHT11 Temperature and Humidity Sensor Module
₹80.50 Incl. of GST12V 40A T91 Relay
- T91 Type Relay
- Coil Voltage: 12V DC
- NC Contact Rating: 40A @ 240V AC / 30V DC
- NO Contact Rating: 30A @ 240V AC / 30V DC
- Model No: JQX-16F(T91)-1Z
₹80.24 Incl. of GST12V 40A T91 Relay
₹80.24 Incl. of GSTXinya XY2500 8 Pin Female Pluggable Terminal – Straight – 3.81mm
- XY2500 8 Pin Female Terminal
- Current Rating: 12A @ 250V AC
- Pitch: 3.81mm
- High Quality
₹80.00 Incl. of GSTXinya XY2500 8 Pin Female Pluggable Terminal – Straight – 3.81mm
₹80.00 Incl. of GSTRC522 RFID Reader / Writer 13.56 Mhz Module Kit
- MFRC522 Based RFID Card Reader / Writer Kit
- Frequency: 13.56 Mhz
- Card Reading / Writing Distance: >= 50 mm
- Operating Voltage: 3.3V
₹80.00₹115.52Incl. of GSTRC522 RFID Reader / Writer 13.56 Mhz Module Kit
₹80.00₹115.52Incl. of GST