No products in the cart.
JLink V9 Debugger Emulator – ARM MCU Development Tool
- The main control chip adopts STM32F205, not lose firmware, and the hardware is upgraded to the latest version of V9.4
- Can provide 3.3V and 0.8A current for the development board (pin 2)
- Support standard JTAG interface and 2-wire SWD debugging interface. The speed can reach 20M (JTAG) / 15M (SWD) per second.
- Support debugging of all ARM chips, support MDK or IAR, and compile environment IDE supported by other standard JLink.
- Original firmware, full automatic upgrade The main control chip adopts STM32F205, without losing the firmware, and the hardware is upgraded to the latest version of V9.4
₹2,550.00 Incl. of GSTJLink V9 Debugger Emulator – ARM MCU Development Tool
₹2,550.00 Incl. of GST20 Mhz Crystal SMD – HC49SMD – YXC
- Crystal oscillator quartz crystal value: 20MHz
- Shunt Capacitance : 7pf (max)
- Material: Steel
- High Stability
₹9.00 Incl. of GST20 Mhz Crystal SMD – HC49SMD – YXC
₹9.00 Incl. of GSTS3M-13-F Diode DO-214AB – SMC – Diodes Incorporated
- DC Blocking Voltage VR: 1000V
- RMS Reverse Voltage VR(RMS): 700V
- Average Rectified Output Current IO: 3A
- Make: Diodes Incorporated
- Non-Repetitive Peak Forward Surge Current IFSM: 100A
- Package: DO-214AB (SMC)
- Make: Diodes Incorporated
₹11.75 Incl. of GSTS3M-13-F Diode DO-214AB – SMC – Diodes Incorporated
₹11.75 Incl. of GSTIRF840 N Channel Mosfet 500V – D2PAK
- Drain-Source Voltage VDS: 500V
- Gate-Source Voltage VGS: ± 20V
- Continuous Drain Current ID: 8A max
- Package: D2PAK
₹53.00 Incl. of GSTIRF840 N Channel Mosfet 500V – D2PAK
₹53.00 Incl. of GSTMini Adjustable 1.3A DC-DC Buck Converter Module 12V 3V3 9V 5V
- Input: 1.5V + Output
- Input Voltage: 24V (max)
- Output: Adjustable (3.3V , 5V , 9V, 12V )
- output current: 1.3A(max)
- efficiency up to 94%.
₹70.00 Incl. of GSTMini Adjustable 1.3A DC-DC Buck Converter Module 12V 3V3 9V 5V
₹70.00 Incl. of GSTMAX13487EESA+ Half-Duplex RS-485 And RS-422 Compatible Transceiver
- Supply Voltage: 5.2V(Max)
- Maximum Data Rate: 500Kbps
- Differential Driver Output: 2V
- allowing up to 128 transceivers on the bus.
- Mode of transmission: Half duplex
- RS-485/RS-422-compatible transceivers
- Make: MAXIM
₹175.00 Incl. of GSTMAX13487EESA+ Half-Duplex RS-485 And RS-422 Compatible Transceiver
₹175.00 Incl. of GSTCN3791 12V MPPT Solar Charger Module
- Input Voltage: 5-15V
- Charge Current Up to 2A
- High PWM Switching Frequency: 300KHz
- Constant Voltage: 4.2V±2%
- Operating Ambient Temperature: 40°C to+85°C
₹235.00₹377.60Incl. of GSTCN3791 12V MPPT Solar Charger Module
₹235.00₹377.60Incl. of GSTMAX6675 K Type Thermocouple Sensor Module With Thermocouple
- Supply Voltage: 3.0V to 5.5V
- Supply Current: 0.7mA to 1.5mA
- Temperature Range: 0 to +1024 Degree C
- 12Bit, 0.25 Degree C accuracy
- Easy to use SPI Output
₹199.00₹238.00Incl. of GSTMAX6675 K Type Thermocouple Sensor Module With Thermocouple
₹199.00₹238.00Incl. of GST2517 4 Pin Single Side Female Cable – 14/38 Gauge – 10cm Length – JST SM Compatible
- Connector Type: 4 Pin Female JST-SM 2517
- Wire Gauge: 14/38
- Cable Length: 10cm
- Connector Pitch: 2.54mm
- Current Rating: 3 A
- Voltage Rating: 250V
₹9.80 Incl. of GSTSMF05.TCT TVS Diode Array For ESD and Latch-Up Protection – SC70-5L
- Diode Configuration: Unidirectional
- Stand-off Voltage : 5V
- Clamping Voltage : ~9.5V at 1A
- Peak Pulse Current : 12A (8/20μs waveform)
- Capacitance : 150pF
- Mounting Type: Surface Mount (SMD/SMT)
- Package Type: SC70-5L
₹9.00 Incl. of GSTSMF05.TCT TVS Diode Array For ESD and Latch-Up Protection – SC70-5L
₹9.00 Incl. of GST
