No products in the cart.
1.3 Inch OLED Display – I2C – IIC – 128×64 – Blue Colour
- Chip: SH1106
- Interface: I2C
- Power Supply: 3.3V-5V
- Display: Graphic LCD, 1.3” in width, with a resolution of 128×64 dots
- Display Colors: BLUE
- Current Consumption: 8 mA when fully operational
₹320.00 Incl. of GST1.3 Inch OLED Display – I2C – IIC – 128×64 – Blue Colour
₹320.00 Incl. of GSTESP32 Programmer Board
- Supports ESP32 and ESP8266
- Can support any MCU that needs BOOT & RESET control
- USB-C Type Interface
- LEDs for Power, RX, TX
- Switch for Reset and Boot
- Both 3.3V and 5V available on the O/P connector
₹519.00 Incl. of GSTESP32 Programmer Board
₹519.00 Incl. of GSTW25N01GVZEIG IC – 3V – 1Gbit – Serial SLC Nand Flash Memory IC – 8-WSON
- Memory Type: Non-Volatile FLASH (NAND, SLC)
- Memory Size: 1Gbit (128M-byte)
- Memory Interface: SPI – Quad I/O
- Clock Frequency: 104 MHz
- Write Cycle Time (Word, Page): 700µs
- Access Time: 7 ns
- Voltage Supply: 2.7V ~ 3.6V
- Make: Winbond
₹94.30 Incl. of GSTW25N01GVZEIG IC – 3V – 1Gbit – Serial SLC Nand Flash Memory IC – 8-WSON
₹94.30 Incl. of GSTK-Type Thermocouple Temperature Sensor – 600° C
- Connector Type: K Type
- Measuring range: 0 to 600 C
- Cable Length: 0.5 Meter
- Interface Type: flat plug-in
- Interface Length: 12.5MM
- Accuracy : 2.5%/0.75%
₹42.80 Incl. of GSTK-Type Thermocouple Temperature Sensor – 600° C
₹42.80 Incl. of GSTAutomatic Hand Sanitizer Dispenser Kit
- Automatic Sanitizer Dispenser Kit
- Operating Voltage: 12V DC
- Current Required: 400 mA Max, 100 mA Continuous
- Sanitizer Output: 2-3 ml on each trigger
- Buzzer Plays on a trigger
- Alternate Product : Solderless Sanitizer Dispenser Kit
₹1,119.82₹1,534.00Incl. of GSTAutomatic Hand Sanitizer Dispenser Kit
₹1,119.82₹1,534.00Incl. of GSTInductor 82uH – 5.2×5.8×4.5mm – CD54 – SMD
- Inductance: 82 µH ± 10%
- Rated Current: 0.6A
- Temperature storage range： -10℃~70℃
- relative humidity：RH65%~85%
- DC Resistance(Ω)Max: 0.6
- L×W×H: 5.2×5.8×4.5mm ± 0.5mm
- Part No.: JCD54-820K
₹9.50 Incl. of GSTInductor 82uH – 5.2×5.8×4.5mm – CD54 – SMD
₹9.50 Incl. of GSTMP1495 Multi Output Step Down Module – 3A
- Wide 4.5V-to-16V Operating Input Range
- Output Voltage VOUT: 0.8V to VIN-3V
- Multiple Output Options : 1.25V, 1.5V, 1.8V, 2.5V, 3.3V, 5V
- Operating Junction Temp. (TJ). -40°C to +125°C
- Fixed 500kHz Switching Frequency
₹72.00 Incl. of GSTMP1495 Multi Output Step Down Module – 3A
₹72.00 Incl. of GSTT90 6V 30A Relay – EF
- T90 Type Relay
- Coil Voltage: 6V DC
- NO Contact Rating: 30A @ 240V AC
- NC Contact Rating: 20A @ 240V AC
- Manufacturer: EF
₹63.00 Incl. of GSTT90 6V 30A Relay – EF
₹63.00 Incl. of GST6N139 Optocoupler – DIP8
- Optocoupler with High Current Transfer Ratio: 2000%
- Low Input Current: 0.5 mA
- High Output Current: 60 mA
- Isolation Voltage: 5000 V
- TTL Compatible
₹50.60 Incl. of GST6N139 Optocoupler – DIP8
₹50.60 Incl. of GST2 Digit 7 Segment Display – 0.56 inch – Red – Common Anode
- Type: Common Anode
- Color: RED
- Display Size: 0.56 inch
- Number of Digits: 2
- Low Current Consumption
- High Brightness
- No. of Pins: 10
- Pin Pitch: 2.54mm
₹16.95 Incl. of GST2 Digit 7 Segment Display – 0.56 inch – Red – Common Anode
₹16.95 Incl. of GSTEthernet Module ENC28J60 – Big Size
- Ethernet Module ENC28J60 Big Size
- SPI Interface
- 1×10 connector, can be easily mounted with the MCU
- Built-in isolation transformer RJ45 connectors HR911105A
- Power LED
- Single Supply: +3.3 V
- 25Mhz Crystal
₹328.00 Incl. of GSTEthernet Module ENC28J60 – Big Size
₹328.00 Incl. of GSTTB6600 Stepper Motor Driver Module
- Output Current: 0.5-4.0A
- Control Signal: 3.3~24V
- Power (MAX): 160W
- Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
- Temperature: -10～45℃
- Humidity: No Condensation
₹393.00₹571.12Incl. of GSTTB6600 Stepper Motor Driver Module
₹393.00₹571.12Incl. of GST