No products in the cart.
AQY211EH – 30V 1A Solid State Relay – DIP-4
- Load Output Voltage: 30V
- Load Output Current: 1A
- Total Power Dissipation: 550mW
- Operating Temperature: -40°C to 85°C
- Turn ON Time: 5ms(max)
- Turn OFF Time: 1ms(max)
₹148.00 Incl. of GSTAQY211EH – 30V 1A Solid State Relay – DIP-4
₹148.00 Incl. of GST201 7 Pin Single Side Female Cable – 7/40 – 11 inch Length – 2mm Pitch – JST PH Compatible
- 201-7 Pin Single Side Female Cable
- Pitch: 2 mm
- Wire Gauge: 7/40
- Cable Length: 11 inch
- Compatible with JST PH 2mm
₹10.50 Incl. of GSTFFC FPC 15 pin Connector – 1mm Pitch – SMD
- Number of Pins: 15
- Mounting Type: SMD
- Pitch:1mm
- Rated Current: 0.8A
- Working Voltage: 50V
- Operating Temperature Range: -25°C to +85°C
₹22.05 Incl. of GSTFFC FPC 15 pin Connector – 1mm Pitch – SMD
₹22.05 Incl. of GSTSP485EEN-LTR Half-Duplex RS-485 Transceivers IC – SOIC-8
- Data Rate: Up to 10Mbps
- Operating Voltage: 5V
- ESD Protection: ±15kV (Human Body Model and IEC61000-4-2 Air Discharge)
- Transceiver Mode: Half-duplex
- Package: SOIC-8
₹23.00 Incl. of GSTSP485EEN-LTR Half-Duplex RS-485 Transceivers IC – SOIC-8
₹23.00 Incl. of GSTNu-Link ICP Programmer – Nuvoton Compatible
- Support KEIL, IAR, CoIDE, and other IDE tools.
- ICP programming Voltage: 3.3V
- Programmable output VDD: 1.8V, 2.5V, 3.3V, 5.0V
- Support Device : NuMicro Families / N76E003 /N76E616 /N76E885 /MS51FB9AE Series etc.
- Support memory read and write, terminal emulation and serial debug output while program is running.
₹1,421.00₹1,549.00Incl. of GSTNu-Link ICP Programmer – Nuvoton Compatible
₹1,421.00₹1,549.00Incl. of GSTHi Link HLK 5M12 – 12V 450mA – AC to DC Power Supply Module
- Output Voltage: 12 VDC
- Output Current: 450 mA
- Universal Input Voltage Range: 85 to 264 VAC
- CE and ROHS Certified
- Small Size
- Meets IP65 Standards
₹241.00₹283.20Incl. of GSTHi Link HLK 5M12 – 12V 450mA – AC to DC Power Supply Module
₹241.00₹283.20Incl. of GSTXL4016 Step Down Module – Constant Current / Constant Voltage Output – 1.25 to 32V Output – 300W
- Wide 8V to 36V Input Voltage Range
- 8A Adjustable Constant Output Current Capability
- Output Adjustable from 1.25V to 32V
- Maximum Duty Cycle 100%
- Minimum Drop Out 0.3V
- Fixed 180KHz Switching Frequency
₹297.00₹335.12Incl. of GSTXL4016 Step Down Module – Constant Current / Constant Voltage Output – 1.25 to 32V Output – 300W
₹297.00₹335.12Incl. of GSTSerial RS232 to TTL converter module
- IC Chip: MAX3232ESE
- Operating Voltage: 3.3-5.5V
- It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU
- Suitable for use with most microcontrollers
- Operates up to 250 kbit/s
₹46.80 Incl. of GSTSerial RS232 to TTL converter module
₹46.80 Incl. of GST2 Channel 5V Relay Module – Optoisolated
- Opto Isolated 2 Channel Relay Module
- Operating Voltage: 5V
- Low Trigger Input Signals
- 3 Outputs Per Relay: NC, NO and C
- Relay Current Rating: 10A @ 250V AC
₹88.50₹116.01Incl. of GST2 Channel 5V Relay Module – Optoisolated
₹88.50₹116.01Incl. of GST18650 2400maH Lithium Ion Battery BAK With Wire – 3C Rated – 1000cycle
- 2400 maH Lithium Ion Battery with wire connector
- JST XH 2 pin Female Connector
- Discharge Rating: 3C
- Charge Rating: 1C
- Life cycle: 1000 cycles
₹129.80 Incl. of GST18650 2400maH Lithium Ion Battery BAK With Wire – 3C Rated – 1000cycle
₹129.80 Incl. of GST15nF 25V Multi Layered Ceramic Capacitor (MLCC) – X7R – SMD 0805 – Yageo – CC0805KRX7R8BB153
- Capacitance: 15nF
- Voltage Rating: 25V
- Dielectric: X7R
- Tolerance: ±10%
- Package Size: SMD 0805
- RoHS Compliant & Lead-Free
- Manufacturer : Yageo
- MPN: CC0805KRX7R8BB153
₹1.20 Incl. of GSTA4988 Stepper Motor Driver Module
- Load Supply Voltage (VBB): 8V-35V
- Output Current: ±2A(max)
- Logic Input Voltage: –0.3V to 5.5V
- Logic Supply Voltage: –0.3V to 5.5V
- Operating Ambient Temperature: –20ºC to 85ºC
₹68.00₹84.00Incl. of GSTA4988 Stepper Motor Driver Module
₹68.00₹84.00Incl. of GST