Arduino Uno R3 – SMD MCU – Without Cable

Arduino Uno R3 is one of the widely used and accepted module for prototyping. It has huge user community worldwide. Uno R3 SMD module is based on the Atmega328p-AU MCU of Atmel AVR Family. It is a 8 Bit Microcontroller. This is an entry level development board. But, is not a basic one, it packs 32 KB Flash, 2 KB RAM, and 1 KB of EEPROM.

The module has onboard USB to TTL converter chip. It also has onboard voltage regulator for 5V and 3.3V. The module can take input of up to 16V DC. The module has a 16 Mhz clock. The Atmega needs 5V for operation @ 16 Mhz. It has 14 Digital I/Os, and 6 Analog Inputs. Out of 14 Digital I/Os, 6 pins can provide PWM output. The module has a UART on pins 0 and 1. Almost all of the pins are mappable with interrupt vector.

The max DC Current per I/O pin is 20mA. The analog inputs can also function as digital I/Os. It supports various interfaces like: SPI,I2C, UART, etc. Also, the onboard 3.3V pin can provide upto 50mA current.

It is used for quick prototyping. This version comes with Separate header pins, which are solderable if required, for connection of female jumper wires.

The module is easily programmable using the Arduino IDE on PC. It needs to connect to the PC via USB Cable. So, the IDE will detect it, and on click of a button, the program compilation and uploading to the development Board will be done. The module can be also programmed via dedicated pins for the programmer, but the Atmel ICE or similar compatible programmer is required in that case. Whereas, No extra components are required, in case of USB.

The IDE provides various ready to use libraries, increasing the usage scenarios for the board.

Specifications:

• Supported by Arduino IDE
• Operating Voltage: 5 V
• Input Voltage: 7 to 12 V
• Digital I/O pins: 14
• PWM Pins: 6
• Analog Input pins: 6
• Flash Memory: 32 KB (0.5 KB used by bootloader)
• SRAM: 2 KB
• EEPROM: 1 KB

Package Includes:

• Arduino Uno R3 SMD Version (USB Cable not included) x 1
• 28×1 Header Pins x 1
• 12×1 Header Pins x 1

Download Arduino IDE