No products in the cart.
Battery Testing Module XH-M240
- Model : XH-M240
- Display Accuracy : 0.1
- measurement accuracy : 1mAH
- Power supply : 5-12v DC
- Stand by current : 5-7 mA
- Load Power : 10W, 8ohm
₹426.00₹698.00Incl. of GSTBattery Testing Module XH-M240
₹426.00₹698.00Incl. of GSTNodeMCU Esp32s- Esp32 Wroom 32 MCU Module – 38 Pin
- ESP32-WROOM-32 Based Development board
- It supports WiFi, Bluetooth, Bluetooth Low Energy
- Dual Core MCU
- Clock Frequency of upto 240 Mhz
- Upto 512 KB RAM
- Available Peripherals: Capactive Touch, ADCs, DACs, UART, SPI, I2C and more
- Available Pins: 38
₹402.00 Incl. of GSTNodeMCU Esp32s- Esp32 Wroom 32 MCU Module – 38 Pin
₹402.00 Incl. of GST12V MPPT Solar Charge Controller for 3S Lithium ion Battery
- Input voltage: nominally about 18V solar panel (no-load 21V solar panel)
- Output Voltage: Nominal 12V (10.8 11.1V) Fully Charged Voltage 12.6V Lithium Battery 3 string lithium battery charge management
- Output current: maximum constant current 3A (charge current greater than 2A please add heat)
- Wiring method: pad
₹399.00₹566.40Incl. of GST12V MPPT Solar Charge Controller for 3S Lithium ion Battery
₹399.00₹566.40Incl. of GSTJT308 USB RFID Card Reader 125KHz
- Power input: USB (from a PC)
- Interface: USB, 106bit / s, no additional driver required.
- Reading distances up to 7 cm
- Frequency: 125 KHz
₹388.22 Incl. of GSTJT308 USB RFID Card Reader 125KHz
₹388.22 Incl. of GSTArduino Uno R3 – SMD MCU – Without Cable
- Arduino Uno R3 SMD version
- Based on Atmel AVR Atmega328-AU MCU
- Clock: 16 Mhz
- Flash: 32 KB
- SRAM: 2 KB
- EEPROM: 1 KB
₹381.20₹399.00Incl. of GSTArduino Uno R3 – SMD MCU – Without Cable
₹381.20₹399.00Incl. of GSTAi Thinker Lora RA-01 RF Transceiver Module
- LoRa spread spectrum communication
- +18dBm – 10mW. Stable RF output power when the input voltage changed
- Half-duplex SPI communication
- Programmable bit rate can reach to 300kbps
₹378.00₹400.02Incl. of GSTAi Thinker Lora RA-01 RF Transceiver Module
₹378.00₹400.02Incl. of GSTENC28J60 Ethernet LAN Module
- ENC28J60 Based Ethernet LAN Module
- Onboard 25MHZ crystal
- 8 KByte Transmit/Receive Packet Dual Port Buffer
- Integrated MAC and 10BASE-T
- 3.3 V power supply pin
- SPI Interface for communication with MCU
₹375.00 Incl. of GSTENC28J60 Ethernet LAN Module
₹375.00 Incl. of GSTAi Thinker Lora RA-02 RF Transceiver Module
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
₹368.00 Incl. of GSTAi Thinker Lora RA-02 RF Transceiver Module
₹368.00 Incl. of GSTESP32 Development Board WiFi + BT + BLE
- ESP32-WROOM-32 Based Development board
- It supports WiFi, Bluetooth, Bluetooth Low Energy
- Dual Core MCU
- Clock Frequency of upto 240 Mhz
- Upto 512 KB RAM
- Available Peripherals: Capactive Touch, ADCs, DACs, UART, SPI, I2C and more
₹348.00₹438.96Incl. of GSTESP32 Development Board WiFi + BT + BLE
₹348.00₹438.96Incl. of GSTESP32-WROOM-32D 8MB Wifi + BT + BLE Module
- Wi-Fi Protocols: 802.11 b/g/n
- Wi-Fi+BT+BLE MCU Module
- On Chip Hall Sensor
- Integrated Crystal of 40 Mhz
- Integrated SPI Flash of 8 MB
- Recommended Voltage: 3.3V
- Operating Current: Average 80 mA
- ESP32-WROOM-32D-N8
₹335.00 Incl. of GSTESP32-WROOM-32D 8MB Wifi + BT + BLE Module
₹335.00 Incl. of GSTADS1115 ADC Module – 16Bit – I2C- 4 Channel ADC
- 4 Channel, 16 Bit Analog to Digital Converter Module
- Interface: I2C
- Operating Voltage: 2.0 V to 5.5 V
- Programmable Data Rate: 8 SPS to 860 SPS
₹328.00₹391.00Incl. of GSTADS1115 ADC Module – 16Bit – I2C- 4 Channel ADC
₹328.00₹391.00Incl. of GSTRaspberry Pi Pico RP2040
- RP2040 microcontroller with 2MByte Flash
- 30 multi-function General Purpose IO (4 can be used for ADC)
- Supply Voltage: 1.8V to 5V
- Micro-USB B port for power and data
- 12-bit 500ksps Analogue to Digital Converter (ADC)
₹320.00 Incl. of GSTRaspberry Pi Pico RP2040
₹320.00 Incl. of GST