No products in the cart.
Raspberry Pi Pico RP2040
- RP2040 microcontroller with 2MByte Flash
- 30 multi-function General Purpose IO (4 can be used for ADC)
- Supply Voltage: 1.8V to 5V
- Micro-USB B port for power and data
- 12-bit 500ksps Analogue to Digital Converter (ADC)
₹320.00 Incl. of GSTRaspberry Pi Pico RP2040
₹320.00 Incl. of GST
DHT22 Digital Temperature and Sensor Module
- Power Supply Voltage: 3.3V to 6V DC
- Humidity Range: 0% to 100% Relative Humidity (RH)
- Humidity Accuracy: ±2% RH (maximum ±5% RH)
- Temperature Range: -40°C to 80°C
- Temperature Accuracy: ±0.5°C
- Signal Output: Digital signal via single-bus interface
- Sensing Element: Polymer capacitor
- Response Time: Typically 2 seconds
₹326.00 Incl. of GSTDHT22 Digital Temperature and Sensor Module
₹326.00 Incl. of GSTEthernet Module ENC28J60 – Big Size
- Ethernet Module ENC28J60 Big Size
- SPI Interface
- 1×10 connector, can be easily mounted with the MCU
- Built-in isolation transformer RJ45 connectors HR911105A
- Power LED
- Single Supply: +3.3 V
- 25Mhz Crystal
₹328.00 Incl. of GSTEthernet Module ENC28J60 – Big Size
₹328.00 Incl. of GSTESP32-WROOM-32UE-N8 – 8MB Flash – WiFi + BT + BLE Module1
- CPU: ESP32-D0WD-V3 embedded, Xtensa® dual-core 32-bit LX6 microprocessor, up to 240 MHz
- Operating voltage: 3.0 ~ 3.6 V
- Wi-Fi: 802.11b/g/n
- Bluetooth: Bluetooth V4.2 BR/EDR and Bluetooth LE specification
- 40 MHz crystal oscillator
- 8 MB SPI flash
₹331.50 Incl. of GSTESP32-WROOM-32UE-N8 – 8MB Flash – WiFi + BT + BLE Module1
₹331.50 Incl. of GSTESP32-WROOM-32D 8MB Wifi + BT + BLE Module
- Wi-Fi Protocols: 802.11 b/g/n
- Wi-Fi+BT+BLE MCU Module
- On Chip Hall Sensor
- Integrated Crystal of 40 Mhz
- Integrated SPI Flash of 8 MB
- Recommended Voltage: 3.3V
- Operating Current: Average 80 mA
- ESP32-WROOM-32D-N8
₹335.00 Incl. of GSTESP32-WROOM-32D 8MB Wifi + BT + BLE Module
₹335.00 Incl. of GSTESP32-C6-Mini-1-N4 IC – Espressif
- Wi-Fi: 2.4 GHz, IEEE 802.11ax, data rate up to 150 Mbps.
- Bluetooth: LE 5.3, speeds up to 2 Mbps.
- Zigbee & Thread: IEEE 802.15.4, data rate 250 Kbps.
- Memory: Up to 4 MB flash, 512 KB SRAM.
- GPIOs: 22 pins with rich peripheral support.
- Power Supply: 3.0 ~ 3.6 V.
₹354.00 Incl. of GSTESP32-C6-Mini-1-N4 IC – Espressif
₹354.00 Incl. of GSTESP32 Development Board WiFi + BT + BLE
- ESP32-WROOM-32 Based Development board
- It supports WiFi, Bluetooth, Bluetooth Low Energy
- Dual Core MCU
- Clock Frequency of upto 240 Mhz
- Upto 512 KB RAM
- Available Peripherals: Capactive Touch, ADCs, DACs, UART, SPI, I2C and more
₹360.00₹438.96Incl. of GSTESP32 Development Board WiFi + BT + BLE
₹360.00₹438.96Incl. of GSTESP32-WROOM-32E N16 WiFi + BT + BLE Module – Espressif
- Operating voltage/Power supply: 3.0 ~ 3.6 V
- Operating ambient temperature: 85 °C version: –40 ~ 85 °C
- 40 MHz Internal crystal oscillator
- Bluetooth V4.2 BR/EDR and Bluetooth LE specification
- WiFi 802.11b/g/n
- Integrated 16 MB SPI flash(N16)
₹367.00 Incl. of GSTESP32-WROOM-32E N16 WiFi + BT + BLE Module – Espressif
₹367.00 Incl. of GST4 Channel USB Dc Dc Buck Converter Fast Charger Module QC3.0 QC2.0
- Input Voltage: 6V to 32V DC
- Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge
- Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.)
- USB Ports: 4x USB Type-A
- Conversion efficiency: 90%-97%
- Supports QC3.0, QC2.0, SFCP, FCP, AFC, BC1.2, Apple, Samsung
₹374.50 Incl. of GST4 Channel USB Dc Dc Buck Converter Fast Charger Module QC3.0 QC2.0
₹374.50 Incl. of GSTCH340C ESP32 ESP8266 USB Programmer – USB Type-C
- Chip: CH340C USB-to-Serial Converter
- Interface: USB Type-C
- Power Supply: Powered via USB connection
- Operating Voltage: 5V via USB, 3.3V regulated output for ESP32 & ESP8266
- Operating Temperature: -40°C to +85°C
₹375.00 Incl. of GSTCH340C ESP32 ESP8266 USB Programmer – USB Type-C
₹375.00 Incl. of GST12V MPPT Solar Charge Controller for 3S Lithium ion Battery
- Input voltage: nominally about 18V solar panel (no-load 21V solar panel)
- Output Voltage: Nominal 12V (10.8 11.1V) Fully Charged Voltage 12.6V Lithium Battery 3 string lithium battery charge management
- Output current: maximum constant current 3A (charge current greater than 2A please add heat)
- Wiring method: pad
₹376.00₹566.40Incl. of GST12V MPPT Solar Charge Controller for 3S Lithium ion Battery
₹376.00₹566.40Incl. of GSTENC28J60 Ethernet LAN Module
- ENC28J60 Based Ethernet LAN Module
- Onboard 25MHZ crystal
- 8 KByte Transmit/Receive Packet Dual Port Buffer
- Integrated MAC and 10BASE-T
- 3.3 V power supply pin
- SPI Interface for communication with MCU
₹378.00 Incl. of GSTENC28J60 Ethernet LAN Module
₹378.00 Incl. of GST