JLink V9 Debugger Emulator – ARM MCU Development Tool
- The main control chip adopts STM32F205, not lose firmware, and the hardware is upgraded to the latest version of V9.4
- Can provide 3.3V and 0.8A current for the development board (pin 2)
- Support standard JTAG interface and 2-wire SWD debugging interface. The speed can reach 20M (JTAG) / 15M (SWD) per second.
- Support debugging of all ARM chips, support MDK or IAR, and compile environment IDE supported by other standard JLink.
- Original firmware, full automatic upgrade The main control chip adopts STM32F205, without losing the firmware, and the hardware is upgraded to the latest version of V9.4
₹2,550.00 Incl. of GSTJLink V9 Debugger Emulator – ARM MCU Development Tool
₹2,550.00 Incl. of GSTESP8266 ESP-01 WiFi Module
- Integrated WiFi SoC Module
- 2 GPIOs
- Operating Voltage: 3.3V
- 1MB Flash Memory
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
₹98.00₹115.65Incl. of GSTESP8266 ESP-01 WiFi Module
₹98.00₹115.65Incl. of GST3S 20A Lithium Ion BMS – For 12.6V Battery
- Self consuming current 24 uA
- Overcharge protection voltage 4.3v(max)
- Over dis-charge protection voltage 2.6(max)
- Over current protection current 60A(max)
- Environment temperature -40°c to 85°c
- Continue work power 252W (max)
₹72.00 Incl. of GST3S 20A Lithium Ion BMS – For 12.6V Battery
₹72.00 Incl. of GSTESP32-WROOM-32E N16 WiFi + BT + BLE Module – Espressif
- Operating voltage/Power supply: 3.0 ~ 3.6 V
- Operating ambient temperature: 85 °C version: –40 ~ 85 °C
- 40 MHz Internal crystal oscillator
- Bluetooth V4.2 BR/EDR and Bluetooth LE specification
- WiFi 802.11b/g/n
- Integrated 16 MB SPI flash(N16)
₹413.00 Incl. of GSTESP32-WROOM-32E N16 WiFi + BT + BLE Module – Espressif
₹413.00 Incl. of GSTSIM A7672G 4G + 2G LTE Development Board – Global Support – Without GNSS
- Input Supply: 5V-12V DC
- DATA Transfer LTE(Mbps): 10 Downlink / 5 Uplink
- Power consumption: 300mA; <10mA (sleep mode)
- SIM Holder: Micro SIM
- ESD protection for Antenna and Power Supply
- SIMcom A7672G 4G LTE chip on-board
- Supports 4G + 2G
- Worldwide (Global) Support
₹2,299.00 Incl. of GSTSIM A7672G 4G + 2G LTE Development Board – Global Support – Without GNSS
₹2,299.00 Incl. of GSTHX710B Air Pressure Sensor Module
- Pressure Range: 0 to 40 kPa
- Supply Voltage: 3.3V–5V
- Resolution: High resolution with 24-bit ADC
- Output Interface: Digital output
- Operating Temperature: -40°C to +85°C
₹92.00 Incl. of GSTHX710B Air Pressure Sensor Module
₹92.00 Incl. of GSTCH340C ESP32 ESP8266 USB Programmer – USB Type-C
- Chip: CH340C USB-to-Serial Converter
- Interface: USB Type-C
- Power Supply: Powered via USB connection
- Operating Voltage: 5V via USB, 3.3V regulated output for ESP32 & ESP8266
- Operating Temperature: -40°C to +85°C
₹375.00 Incl. of GSTCH340C ESP32 ESP8266 USB Programmer – USB Type-C
₹375.00 Incl. of GSTCP2102 ESP32 ESP8266 USB Programmer – USB Type-C
- Supports ESP32 and ESP8266
- Can support any MCU that needs BOOT & RESET control
- USB-C Type Interface
- LEDs for Power, RX, TX
- Switch for Reset and Boot
- Both 3.3V and 5V available on the O/P connector
₹415.00 Incl. of GSTCP2102 ESP32 ESP8266 USB Programmer – USB Type-C
₹415.00 Incl. of GSTEC200U-CN 4G + 2G LTE Development Board – Quectel – Without GNSS
- Input Supply: 5V-12V DC, 2A
- DATA Transfer LTE(Mbps): 10 Downlink / 5 Uplink
- Power consumption: 300mA; <25mA (sleep mode)
- SIM Holder: Nano SIM
- Quectel EC200U-CN chip on-board
- Supports 4G + 2G
₹1,639.00 Incl. of GSTEC200U-CN 4G + 2G LTE Development Board – Quectel – Without GNSS
₹1,639.00 Incl. of GSTEspressif ESP32-S3-DevKitM-1-N8 Development board – ESP32-S3-WROOM-1-N16R8
- Microcontroller: ESP32-S3 (Dual-core, 240 MHz)
- Module: ESP32-S3-WROOM-1-N16R8 (16MB Flash, 8MB PSRAM)
- Wireless Support: 2.4 GHz Wi-Fi, Bluetooth Low Energy (BLE)
- Power Supply: 5V via Micro-USB
- Voltage Regulation: 5V to 3.3V LDO for stable board operation
- GPIO Pins: 34 I/O pins, including UART, SPI, I2C, PWM, ADC, DAC, and more
- Buttons: Boot and Reset buttons for firmware flashing and system reset
- LEDs: RGB LED (GPIO38) and 3.3V Power On LED
- USB Interface: USB-to-UART bridge for flashing and debugging
- Debugging: Supports JTAG debugging interface
- Form Factor: Compact development board with pin headers for easy integration
₹645.00 Incl. of GSTEspressif ESP32-S3-DevKitM-1-N8 Development board – ESP32-S3-WROOM-1-N16R8
₹645.00 Incl. of GST5V 2A DC Supply Adapter – High Quality Adapter With BIS Certification
- Input – 100-290 VAc @ 50hz
- Category – Switch Mode Power Adapter (SMPS)
- Output Type – DC
- Max Output – 5Volts 2A
- High Quality Adapter with BIS Certificate
₹149.00 Incl. of GST5V 2A DC Supply Adapter – High Quality Adapter With BIS Certification
₹149.00 Incl. of GSTESP32-S3-WROOM-1 Wi-Fi + Bluetooth LE MCU – ESP32 S3 WROOM 1 N16R8
- Operating voltage/Power supply: 3.0 ~ 3.6 V
- On-board PCB antenna
- 40 MHz crystal oscillator
- Bluetooth LE: Bluetooth 5, Bluetooth mesh
- 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (LE) module
- Up to 36 GPIOs, rich set of peripherals
₹354.00 Incl. of GSTESP32-S3-WROOM-1 Wi-Fi + Bluetooth LE MCU – ESP32 S3 WROOM 1 N16R8
₹354.00 Incl. of GST
Get Lightning Fast dispatch on all orders without any extra charge. And avail GST credit on all your purchases.