No products in the cart.
1 Channel 5V Relay Module
- Operating Voltage: 5 VDC
- Current Rating: 10A @ 250 VAC
- Single Channel Relay Module
- Transistor Based Driving Mode
₹39.00₹53.10Incl. of GST1 Channel 5V Relay Module
₹39.00₹53.10Incl. of GSTRS485 to TTL Converter Module
- RS485 to TTL Converter
- Supports 3.3V and 5V Power Supply
- Indicator Lights for RX and TX
- Long Range: Support for upto 800m
₹38.95₹134.00Incl. of GSTRS485 to TTL Converter Module
₹38.95₹134.00Incl. of GST2S 7.4V 3A Lithium Ion Battery Charging And Protection BMS Module
- 2S 3A BMS
- Charging Voltage: 8.4V to 9V
- Charging Current: 3A
- Discharge Current: 2A
- Overcharge, Over discharge, over current protection
₹37.80₹70.80Incl. of GST2S 7.4V 3A Lithium Ion Battery Charging And Protection BMS Module
₹37.80₹70.80Incl. of GSTBMP180 Barometric Pressure Sensor
- Vin: 3 to 5 Vdc
- Logic: 3 to 5V compliant
- Pressure sensing range: 300-1100 hPa (9000m to -500m above sea level)
- Up to 0.03hPa / 0.25m resolution
- -40 to +85°C operational range, +-2°C temperature accuracy
- This board/chip uses I2C 7-bit address 0x77
₹35.00 Incl. of GSTBMP180 Barometric Pressure Sensor
₹35.00 Incl. of GST
1S 3A 18650 NMC Lithium Battery BMS Round Shape with Nickel Strip
- Nominal Voltage: 3.7V
- Overcharge Release Voltage: 4.23 ± 0.05V
- Overcharge Protection Voltage: 4.25 ± 0.05V
- Over-Discharge Protection Voltage: 2.54 ± 0.1V
- Overcurrent Detection Threshold: 2A to 3A
₹33.00 Incl. of GST1S 3A 18650 NMC Lithium Battery BMS Round Shape with Nickel Strip
₹33.00 Incl. of GST5V Fixed Output Boost Module – 0.9V to 5V USB Charger
- Input voltage: 0.9-5V DC
- Ultra-small PFM control onboard DC / DC boost controller chip
- Output voltage: 5V DC
- Output Current: 500 to 600mA
- On-board input voltage indicator LED
₹33.00 Incl. of GST5V Fixed Output Boost Module – 0.9V to 5V USB Charger
₹33.00 Incl. of GSTLASER Diode Module – 5V DC – 650nM
- Voltage: 3.0 V – 5 V
- Transmit power: 58mW
- Input current: 30mA
- Wavelength: 650nM
- Operating temperature: -36°C ~ 65°C
₹32.00 Incl. of GSTLASER Diode Module – 5V DC – 650nM
₹32.00 Incl. of GSTSoil Moisture Sensor Module – Humidity Sensor
- Supply Voltage: 3.3V to 5V DC
- Operating Current: 15mA
- Digital Output Voltage: 0V to 5V (configurable threshold)
- Analog Output Voltage: 0V to 5V corresponding to soil moisture levels
- Output Interface: 4-pin header (VCC, GND, D0, A0)
₹31.90 Incl. of GSTSoil Moisture Sensor Module – Humidity Sensor
₹31.90 Incl. of GSTMini 360 DC DC Buck Converter Module
- Module: Non-isolated step-down module (BUCK)
- Input Voltage Range: 4.75V – 23VDC
- Selectable Output Voltage: 1.0V – 17VDC
- Regulator IC: MPS MP2307DN
- Rated Current: 1.8A Continuous (3A Surge Current)
- Switching Frequency: 340kHz
₹30.50₹53.69Incl. of GSTMini 360 DC DC Buck Converter Module
₹30.50₹53.69Incl. of GSTIR Sensor Module – Infrared Proximity Sensor
- Infrared Based Object Detection Sensor
- Adjustable Sensitivity
- Measuring Range: 2 to 10 cm
- Operating Voltage: 3 to 5 VDC
₹29.80 Incl. of GSTIR Sensor Module – Infrared Proximity Sensor
₹29.80 Incl. of GSTA3144 Hall Sensor Module
- Operating Voltage: 5V DC
- Output Current: 25 mA maximum
- Operating Temperature Range: -40°C to +85°C
- Response Time: Turn-on and turn-off time of 2 µs each
- It can be used to detect both the poles of a magnet
₹29.00 Incl. of GSTA3144 Hall Sensor Module
₹29.00 Incl. of GSTMicro SD Card Module – SPI
- Operating voltage: 4.5V to 5V
- Communication interface: SPI
- 4 x M2 screw positioning holes for easy installation
- Support Micro SD Card (<=2G), Micro SDHC card (<=32G) (high-speed card)
- On board level conversion circuit board allows interface level of 5V or 3.3V
₹29.00 Incl. of GSTMicro SD Card Module – SPI
₹29.00 Incl. of GST