SIM A7672G 4G + 2G LTE Development Board – Global Support – Without GNSS
- Input Supply: 5V-12V DC
- DATA Transfer LTE(Mbps): 10 Downlink / 5 Uplink
- Power consumption: 300mA; <10mA (sleep mode)
- SIM Holder: Micro SIM
- ESD protection for Antenna and Power Supply
- SIMcom A7672G 4G LTE chip on-board
- Supports 4G + 2G
- Worldwide (Global) Support
₹2,299.00 Incl. of GSTSIM A7672G 4G + 2G LTE Development Board – Global Support – Without GNSS
₹2,299.00 Incl. of GST
SPI BIOS FLASH Non-Dismantling Test Program Clip SOP8 24C 93C 25LF
- Supported IC Package: SOP8 (Small Outline Package, 8-pin)
- Pitch Lead: 2.54mm
- Clip Type: Spring-loaded test clip for secure contact
- Cable Type: 8-pin multi-wire cable for programmer connection
- Supports many different EEPROMS 150mil / 209mil – 24Cxx, 25Cxx, 93Cxx, 95xxx, 25Lxx
- Applications: BIOS re-flashing, EEPROM programming, and in-circuit testing
₹149.00 Incl. of GSTSPI BIOS FLASH Non-Dismantling Test Program Clip SOP8 24C 93C 25LF
₹149.00 Incl. of GSTMAX4466 Electret Microphone Amplifier Module with Adjustable Gain
- +2.4V to +5.5V Supply Voltage Operation
- Excellent Power-Supply Rejection Ratio: 112dB
- Excellent Common-Mode Rejection Ratio: 126dB
- High AVOL: 125dB (RL = 100kΩ)
- Rail-to-Rail Outputs
- Low 24µA Quiescent Supply Current
₹98.50 Incl. of GSTMAX4466 Electret Microphone Amplifier Module with Adjustable Gain
₹98.50 Incl. of GST13S 30A Lithium Ion BMS – 48V
- Number of cells in series: 13S
- Input Charging Current: 30A
- Output Discharging Current: 30A
- Use: 48V lithium battery
₹886.00₹1,049.02Incl. of GST13S 30A Lithium Ion BMS – 48V
₹886.00₹1,049.02Incl. of GSTSanitizer Dispenser Enclosure – 1.8 Litre
- Tank Capacity: 1.8 Ltr
- Specially designed for use as Sanitizer Dispenser Machine Enclosure
- Very less evaporation rate of Alcohol Based Sanitizer
- Easy fitment of Solenoid Valve or Pump
- Holes for Ultra Sonic sensor, and DC Plug are pre machined
₹708.00 Incl. of GSTSanitizer Dispenser Enclosure – 1.8 Litre
₹708.00 Incl. of GSTNodeMCU Esp32S Big Size – Esp32 Wroom 32 MCU Module – 38 Pin
- ESP32-WROOM-32 Based Development board(BIG-SIZE)
- It supports WiFi, Bluetooth, Bluetooth Low Energy
- Dual Core MCU
- Clock Frequency of upto 240 Mhz
- Upto 512 KB RAM
- Available Peripherals: Capactive Touch, ADCs, DACs, UART, SPI, I2C and more
- Available Pins: 38
₹402.00 Incl. of GSTNodeMCU Esp32S Big Size – Esp32 Wroom 32 MCU Module – 38 Pin
₹402.00 Incl. of GST12V 2 Channel IoT Relay Module – Smart Iot Home Automation Relay
- On board high quality MCU and ESP-01 WIFI module.
- IoT Relay – can be controlled using mobile app from anywhere in the world subject to internet connectivity
- Input Voltage : 12V DC to be connected IN+ and IN-
- 2 Relays to control 2 different devices
- UART serial port PIN: 5V, GND, TX, RX.
- Reserved MCU download port: CLK, DATA, RST, GND.
- Module Status indication via LED
- Factory Reset Switch
₹699.00₹809.00Incl. of GST12V 2 Channel IoT Relay Module – Smart Iot Home Automation Relay
₹699.00₹809.00Incl. of GSTSI7021 Temperature And Humidity Sensor Module
- Uses the I2C interface
- Typical humidity accuracy of ±2%
- Typical temperature accuracy of ±0.3C
- Operates from 0 to 100% humidity but this sensor isn’t recommended for harsh environments where it could come in contact with water (such as rain)
- 3.3V sensor – use inline logic level converters or 10kΩ resistors to limit 5V signals
- Only one Si7021 sensor can reside on the I2C bus at a time
₹631.00 Incl. of GSTSI7021 Temperature And Humidity Sensor Module
₹631.00 Incl. of GSTRS422 to TTL Power Supply Converter Board – MAX490ESA Based
- Communication Interface: RS422 to TTL (two-way)
- Transmission Distance: Up to 1000 meters
- Power Supply: 5V DC
- Logic Compatibility: TTL level (TXD, RXD at 5V logic)
- Communication Speed: Up to 2.5 Mbps
- Driver IC: MAX490ESA
₹132.00 Incl. of GSTRS422 to TTL Power Supply Converter Board – MAX490ESA Based
₹132.00 Incl. of GSTSHT20 Humidity and Temperature Sensor – MRS type
- Sensor Type: SHT20
- Interface: I2C
- Humidity Range: 0% to 100% RH
- Accuracy:
- Temperature: ±0.3°C
- Humidity: ±2% RH
- Power Supply: 3.3V to 5.5V
- Current Consumption: <1mA
- Waterproof Rating: IP65
- Probe Material: Stainless steel
- Connector Type: Mini Round Shell(MRS)
- Wire Length: 1 meter
₹729.00 Incl. of GSTSHT20 Humidity and Temperature Sensor – MRS type
₹729.00 Incl. of GST2 Channel USB Dc Dc Buck Converter Fast Charger Module QC3.0 QC2.0
- Input Voltage: 6V to 32V DC
- Output voltage: Default 5V, automatically adjust between 3-12V after triggering fast charge
- Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.)
- USB Ports: 2 x USB Type-A
- Conversion efficiency: 90%-97%
- Supports QC2.0, QC3.0, AFC, SFCP, FCP, BC1.2, Apple, Samsung
₹204.90 Incl. of GST2 Channel USB Dc Dc Buck Converter Fast Charger Module QC3.0 QC2.0
₹204.90 Incl. of GSTMH-Z19E Infrared CO2 Sensor Module
- Model No.- MH-Z19E
- Detection Gas: CO2
- Working voltage: 5.0±0.1V DC
- Average current: <40mA (@5V power supply)
- Response Time: T90 <120s
₹1,570.00 Incl. of GSTMH-Z19E Infrared CO2 Sensor Module
₹1,570.00 Incl. of GST
Enjoy Blazing Fast Shipping on All Orders At No Extra Cost !!!