No products in the cart.
MQ9 Gas Sensor Module – Carbon Monoxide, Methane and LPG Sensor Module
- Input voltage: DC 5V
- Power: 150mA
- DO output: TTL digital 0 and 1 (0.1 and 5V)
- AO output: 0.1-0.3V (relatively clean), the highest concentration voltage is about 4V.
₹128.60 Incl. of GSTMQ9 Gas Sensor Module – Carbon Monoxide, Methane and LPG Sensor Module
₹128.60 Incl. of GST5V 2A DC Supply Adapter – High Quality Adapter With BIS Certification
- Input – 100-290 VAc @ 50hz
- Category – Switch Mode Power Adapter (SMPS)
- Output Type – DC
- Max Output – 5Volts 2A
- High Quality Adapter with BIS Certificate
₹149.00 Incl. of GST5V 2A DC Supply Adapter – High Quality Adapter With BIS Certification
₹149.00 Incl. of GST13S 30A Lithium Ion BMS – 48V
- Number of cells in series: 13S
- Input Charging Current: 30A
- Output Discharging Current: 30A
- Use: 48V lithium battery
₹886.00₹1,049.02Incl. of GST13S 30A Lithium Ion BMS – 48V
₹886.00₹1,049.02Incl. of GSTSanitizer Dispenser Enclosure – 1.8 Litre
- Tank Capacity: 1.8 Ltr
- Specially designed for use as Sanitizer Dispenser Machine Enclosure
- Very less evaporation rate of Alcohol Based Sanitizer
- Easy fitment of Solenoid Valve or Pump
- Holes for Ultra Sonic sensor, and DC Plug are pre machined
₹708.00 Incl. of GSTSanitizer Dispenser Enclosure – 1.8 Litre
₹708.00 Incl. of GSTSI7021 Temperature And Humidity Sensor Module
- Uses the I2C interface
- Typical humidity accuracy of ±2%
- Typical temperature accuracy of ±0.3C
- Operates from 0 to 100% humidity but this sensor isn’t recommended for harsh environments where it could come in contact with water (such as rain)
- 3.3V sensor – use inline logic level converters or 10kΩ resistors to limit 5V signals
- Only one Si7021 sensor can reside on the I2C bus at a time
₹631.00 Incl. of GSTSI7021 Temperature And Humidity Sensor Module
₹631.00 Incl. of GSTCC1101 RF Transceiver Module – 868Mhz
- Support FSK, GFSK, ASK / OOK and MSK
- Programmable data rate: 1.2 to 500k Baud
- Vertical Pin header (1.27mm pitch)
- Low voltage input (1.9~3.6V)
- SPI interface
- Independent 64-byte RX and TX data FIFOsCC1101 Core, 433MHz Wireless function
₹265.00 Incl. of GSTCC1101 RF Transceiver Module – 868Mhz
₹265.00 Incl. of GST5V 10A SMPS Industrial -DL- 50W
- AC Input Voltage: 110V/220V ± 15%
- DC output voltage: 5V
- Output Current: 10A Max
- Output power: 50W
- Model: DL-50W
₹540.00 Incl. of GST5V 10A SMPS Industrial -DL- 50W
₹540.00 Incl. of GST12V 2 Channel IoT Relay Module – Smart Iot Home Automation Relay
- On board high quality MCU and ESP-01 WIFI module.
- IoT Relay – can be controlled using mobile app from anywhere in the world subject to internet connectivity
- Input Voltage : 12V DC to be connected IN+ and IN-
- 2 Relays to control 2 different devices
- UART serial port PIN: 5V, GND, TX, RX.
- Reserved MCU download port: CLK, DATA, RST, GND.
- Module Status indication via LED
- Factory Reset Switch
₹699.00₹809.00Incl. of GST12V 2 Channel IoT Relay Module – Smart Iot Home Automation Relay
₹699.00₹809.00Incl. of GSTUltrasonic Sensor Module – HY-SRF05
- Ultra Sonic Sensor
- Detection Distance: 3cm to 400cm
- Detection Angle: Not less than 15 Degree
- Input Signal: 10uS TTL Pulse
₹118.00 Incl. of GSTUltrasonic Sensor Module – HY-SRF05
₹118.00 Incl. of GST2 Channel USB Dc Dc Buck Converter Fast Charger Module QC3.0 QC2.0
- Input Voltage: 6V to 32V DC
- Output voltage: Default 5V, automatically adjust between 3-12V after triggering fast charge
- Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.)
- USB Ports: 2 x USB Type-A
- Conversion efficiency: 90%-97%
- Supports QC2.0, QC3.0, AFC, SFCP, FCP, BC1.2, Apple, Samsung
₹204.90 Incl. of GST2 Channel USB Dc Dc Buck Converter Fast Charger Module QC3.0 QC2.0
₹204.90 Incl. of GST12V 5A SMPS Industrial – DL – 60W
- AC Input Voltage: 110V/220V ± 15%
- DC output voltage: 12V
- Output Current: 5A Max
- Output power: 60W
- Model: DL-60W
₹495.00 Incl. of GST12V 5A SMPS Industrial – DL – 60W
₹495.00 Incl. of GST12V 2 Channel WiFi Relay module
- Relay Channel: 2
- Input/Trigger Voltage (VDC): 12V DC
- Switching Voltage (VAC):250@10A
- Switching Voltage (VDC):30@10A
- Wireless relay module allows to control anything using mobile app
- Has Wifi And Hotstop Mode
- LEDs to indicate different modes and status of module
- Reserved UART debug interface and MCU download port for programming
- Only works when Mobile and Module connected to same wifi network
₹599.00₹660.00Incl. of GST12V 2 Channel WiFi Relay module
₹599.00₹660.00Incl. of GST