- You need to add a minimum of 10 x 25V 47uF Electrolytic Capacitor - 5 x 11 mm's to cart.
- You need to add a minimum of 10 x 25V 47uF Electrolytic Capacitor - 5 x 11 mm's to cart.
XC6203P332PR-G 3.3V Linear Voltage Regulator IC – Torex Semi – SOT-89
- Maximum Operating Voltage : 8.0V
- Output Voltage: 3.3V
- Maximum Output Current : 400mA (3.3V)
- Dropout Voltage : 150mV @ 100mA,
300mV @ 200mA - MPN: XC6203P332PR-G
- Package: SOT-89
- Make: Torex
₹20.65 Incl. of GSTXC6203P332PR-G 3.3V Linear Voltage Regulator IC – Torex Semi – SOT-89
₹20.65 Incl. of GSTUSR-C216 WiFi Module – UART to WiFi Converter
- SMT WIFI Module
- Support Wi-Fi@2.4 GHz 802.11b/g/n wireless standards
- Support work as AP, STA, AP+STA mode
- 3.0V~3.6V power supply
- On-board PCB antenna and external antenna optional
- Support WPA/WPA2 security mode.
₹830.00 Incl. of GSTUSR-C216 WiFi Module – UART to WiFi Converter
₹830.00 Incl. of GSTST3232CDR RS-232 Transceiver IC – STMicroelectronics – SOIC-16
- Supply voltage: 1V-5V
- Input resistance: 5K ohms
- Output voltage swing: ±5.4V
- Data transfer rate: 300Kbps
- Package: SOIC-16
₹86.00 Incl. of GSTST3232CDR RS-232 Transceiver IC – STMicroelectronics – SOIC-16
₹86.00 Incl. of GSTVL53L0X TOF BASED LIDAR Laser Distance Sensor
- Emitter: 940 nm laser VCSEL
- Measures absolute range up to 2 m
- Ranging sensor with advanced embedded micro controller
- Operating voltage 3.3V to 5V
- Communication Protocol: I2C
₹135.00₹270.00Incl. of GSTVL53L0X TOF BASED LIDAR Laser Distance Sensor
₹135.00₹270.00Incl. of GSTLM3914 Dot Bar Display Driver IC – DIP-18
- Supply Voltage: 25V
- Voltage on Output Drivers: 25V
- Package/Case: DIP-18
- Storage Temperature Range: −55°C to +150°C
₹42.00 Incl. of GSTLM3914 Dot Bar Display Driver IC – DIP-18
₹42.00 Incl. of GSTSFR315A SAW Resonator – TH
- Frequency: 315 MHz
- Frequency tolerance: ±30 ppm at room temperature
- Load capacitance: 30 pF
- Shunt capacitance: 1.8 pF (typical)
- Operating temperature range: -40°C to +85°C
- Package type: Through-hole
₹16.50 Incl. of GSTSFR315A SAW Resonator – TH
₹16.50 Incl. of GSTBourns RLB9012-221KL 220uH Inductor – 10% – 1A – TH
- Series: RLB9012
- Make: Bourns
- Inductance: 220uH
- Tolerance: 10%
- Current Rating (Amps): 1A
- Mounting Type: Through Hole
- Dimension: 9.0mm x 12.20mm
₹24.10 Incl. of GSTBourns RLB9012-221KL 220uH Inductor – 10% – 1A – TH
₹24.10 Incl. of GSTHeat Shrink Sleeve Red 4mm
- Colour: Red
- Diameter: 4 mm
- Shrink Ratio: 2:1
- Shrink Temperature: 90° C
- Make: WOER
₹9.44 Incl. of GSTHeat Shrink Sleeve Red 4mm
₹9.44 Incl. of GST100uf 10V Tantalum Capacitor – 107C B3528 – Vishay
- Package: 3528-21 SMD package
- CV Range: 100μF / 10V
- Terminations: 100 % matte tin
- Tolerance: 10%
- ESR: 1.7 ohms
- Make: Vishay
- MPN: TMCMB1A107MTR2F
₹13.60 Incl. of GST100uf 10V Tantalum Capacitor – 107C B3528 – Vishay
₹13.60 Incl. of GSTSS14 Diode – Schottky Diode – 40V 1A – SOD-123
- Mounting Style: SMD/SMT
- Package/Case: SOD-123
- Max Forward Current: 1A
- Max Repetitive Reverse Voltage: 40V
- Max Forward Voltage: 0.5V
- Max Forward Surge Current: 40A
- Operating Temperature: -65 C to 150 C
₹1.42 Incl. of GSTSS14 Diode – Schottky Diode – 40V 1A – SOD-123
₹1.42 Incl. of GSTSS12 Diode – Schottky Diode – 1A 20V – SMA (DO214-AC)
- Max Repetitive Voltage: 20 V
- Maximum Average Rectified Current: 1 A
- Peak Forward Surge Current: 30 A
- Maximum DC Blocking Voltage: 20V
- Max Instantaneous Forward Voltage at 1 A: 0.55V
₹1.50 Incl. of GSTSS12 Diode – Schottky Diode – 1A 20V – SMA (DO214-AC)
₹1.50 Incl. of GSTCR2032 Battery Holder Vertical Mount – TH
- CR2032 battery Holder Vertical mount type.
- Generally used for holding 3v Lithium coin batteries.
- PCB mountable 3v Battery holders which can be soldered directly to PCBs.
- Can be used for experimental boards, toys and small robots etc.
- It is also suitable for 3V Lithium Coin batteries used in Laptops / Computers / Notebooks etc.
₹9.99 Incl. of GSTCR2032 Battery Holder Vertical Mount – TH
₹9.99 Incl. of GST