No products in the cart.
SPI BIOS FLASH Non-Dismantling Test Program Clip SOP8 24C 93C 25LF
- Supported IC Package: SOP8 (Small Outline Package, 8-pin)
- Pitch Lead: 2.54mm
- Clip Type: Spring-loaded test clip for secure contact
- Cable Type: 8-pin multi-wire cable for programmer connection
- Supports many different EEPROMS 150mil / 209mil – 24Cxx, 25Cxx, 93Cxx, 95xxx, 25Lxx
- Applications: BIOS re-flashing, EEPROM programming, and in-circuit testing
₹149.00 Incl. of GSTSPI BIOS FLASH Non-Dismantling Test Program Clip SOP8 24C 93C 25LF
₹149.00 Incl. of GSTXY2500RT 2 Pin Male Pluggable Terminal RA – 2.54mm Pitch
- Product Type: XY2500RT 2 Pin Male Pluggable Terminal
- Connector Type: Male Terminal, Pluggable
- Pitch: 2.54mm
- Orientation: Right Angle (RA)
- Number of Pins: 2 Pins
- Mounting Type: PCB horizontal mounting
- Current Rating: Typically supports up to 4A
- Voltage Rating: 150/250V AC/DC (typical)
- Operating Temperature Range: -40°C to +105°C
₹19.20 Incl. of GSTXY2500RT 2 Pin Male Pluggable Terminal RA – 2.54mm Pitch
₹19.20 Incl. of GSTSOIC8 SOP8 to DIP8 Programmer Adapter Converter Module
- Module Type: SOIC8/SOP8 to DIP8 Adapter
- Supported IC Packages: SOIC8, SOP8
- Pin Spacing: 1.27mm (SOIC/SOP side), 2.54mm (DIP side)
- Socket Type: ZIF (Zero Insertion Force) socket for easy chip handling
- Pin Configuration: 1-to-1 pin mapping between SOIC8 and DIP8
- Compatible ICs: EEPROMs, Flash Memory, Microcontrollers, etc.
₹165.00 Incl. of GSTSOIC8 SOP8 to DIP8 Programmer Adapter Converter Module
₹165.00 Incl. of GSTMP2617BGL IC – 3A Switching Battery Charger IC Power Path Management – MPS – QFN-20
- Operating Input Voltage Range: 4.0V to 10.0V
- Switching Frequency: 1.6 MHz (Typ), with a range from 1.4 MHz to 1.8 MHz
- Input Current Limit Options: USB2.0 (450mA), USB3.0 (825mA), Default Mode (2000mA), and Programmable Mode
- Quiescent Current: Charger enabled (up to 5mA), disabled mode (3-5µA)
- SYS Output Regulation Voltage: 3.6V (Typ) for VBATT ≤ 3.4V and programmable up to 4.63V
- Package: SMD QFN-20 (3mmX4mm)
₹171.00 Incl. of GSTMP2617BGL IC – 3A Switching Battery Charger IC Power Path Management – MPS – QFN-20
₹171.00 Incl. of GSTFFC Cable 22 pin 0.5mm Pitch – 150mm length – Type A
- Name: FFC (Flexible Flat Cable)
- Number of Pins: 22
- Pitch: 0.5mm
- Length: 150mm
- Type: A (Conductors on the Same Side)
- Material: Polyester
- Operating Temperature: +80°C
- Voltage Rating: 60V
- Current Rating: 0.5A per pin
- Bend Radius: ≥ 5mm
₹24.00 Incl. of GSTFFC Cable 22 pin 0.5mm Pitch – 150mm length – Type A
₹24.00 Incl. of GST12V 2 Channel IoT Relay Module – Smart Iot Home Automation Relay
- On board high quality MCU and ESP-01 WIFI module.
- IoT Relay – can be controlled using mobile app from anywhere in the world subject to internet connectivity
- Input Voltage : 12V DC to be connected IN+ and IN-
- 2 Relays to control 2 different devices
- UART serial port PIN: 5V, GND, TX, RX.
- Reserved MCU download port: CLK, DATA, RST, GND.
- Module Status indication via LED
- Factory Reset Switch
₹699.00₹809.00Incl. of GST12V 2 Channel IoT Relay Module – Smart Iot Home Automation Relay
₹699.00₹809.00Incl. of GSTSI7021 Temperature And Humidity Sensor Module
- Uses the I2C interface
- Typical humidity accuracy of ±2%
- Typical temperature accuracy of ±0.3C
- Operates from 0 to 100% humidity but this sensor isn’t recommended for harsh environments where it could come in contact with water (such as rain)
- 3.3V sensor – use inline logic level converters or 10kΩ resistors to limit 5V signals
- Only one Si7021 sensor can reside on the I2C bus at a time
₹631.00 Incl. of GSTSI7021 Temperature And Humidity Sensor Module
₹631.00 Incl. of GST2 Channel USB Dc Dc Buck Converter Fast Charger Module QC3.0 QC2.0
- Input Voltage: 6V to 32V DC
- Output voltage: Default 5V, automatically adjust between 3-12V after triggering fast charge
- Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.)
- USB Ports: 2 x USB Type-A
- Conversion efficiency: 90%-97%
- Supports QC2.0, QC3.0, AFC, SFCP, FCP, BC1.2, Apple, Samsung
₹204.90 Incl. of GST2 Channel USB Dc Dc Buck Converter Fast Charger Module QC3.0 QC2.0
₹204.90 Incl. of GSTMH-Z19E Infrared CO2 Sensor Module
- Model No.- MH-Z19E
- Detection Gas: CO2
- Working voltage: 5.0±0.1V DC
- Average current: <40mA (@5V power supply)
- Response Time: T90 <120s
₹1,570.00 Incl. of GSTMH-Z19E Infrared CO2 Sensor Module
₹1,570.00 Incl. of GST5V 10A SMPS Industrial -DL- 50W
- AC Input Voltage: 110V/220V ± 15%
- DC output voltage: 5V
- Output Current: 10A Max
- Output power: 50W
- Model: DL-50W
₹540.00 Incl. of GST5V 10A SMPS Industrial -DL- 50W
₹540.00 Incl. of GSTPCA9536DGKR IO Expander IC
- 1µA Maximum low standby current consumption
- Input/output configuration register
- Polarity inversion register
- Internal power-ON reset
- No glitch on power-up
- Inbuilt ESD Protection
₹98.00 Incl. of GSTPCA9536DGKR IO Expander IC
₹98.00 Incl. of GSTMAX40200AUK+ Ideal Diode – 1A – Ultra Low Voltage Drop – SOT-23-5
- Wide supply voltage range: 1.5V to 5.5V
- Ultra-low voltage drop: Less than 43mV at 500mA, 85mV at 1A
- Longer battery life: Low leakage when reverse-biased (70nA typical, 1.5µA max)
- Low supply quiescent current: 7µA typical, 18µA max
- package: SOT23-5
- Thermally self-protecting
- Extended temperature range: -40°C to +125°C
₹38.90 Incl. of GSTMAX40200AUK+ Ideal Diode – 1A – Ultra Low Voltage Drop – SOT-23-5
₹38.90 Incl. of GST