No products in the cart.
XL6009 Step Up Module with Display
- Input Voltage: 3 ~ 32 V
- Output Voltage: 5 ~ 40V
- Transfer Efficiency: 94%
- Operating Temperature: -40°C to +85°C
- The booster works below 5V normally, but the display does not work
₹249.80₹280.84Incl. of GSTXL6009 Step Up Module with Display
₹249.80₹280.84Incl. of GST
AHT25 Temperature and Humidity Sensor Module
- Temperature Range: -40°C to +85°C
- Humidity Range: 0% to 100% RH
- Accuracy: ±0.3°C (Temperature), ±2% RH (Humidity)
- Power Supply: 2.2V to 5.5V
- Interface: I2C
₹121.00 Incl. of GSTAHT25 Temperature and Humidity Sensor Module
₹121.00 Incl. of GSTBattery Testing Module XH-M240
- Model : XH-M240
- Display Accuracy : 0.1
- measurement accuracy : 1mAH
- Power supply : 5-12v DC
- Stand by current : 5-7 mA
- Load Power : 10W, 8ohm
₹426.00₹698.00Incl. of GSTBattery Testing Module XH-M240
₹426.00₹698.00Incl. of GSTMAX7219 Dot Led Matrix Module – 8×8 MCU Control
- Driver Chip: MAX7219
- Input Voltage: 4-5.5V
- Input Current 330mA
- Requires only 3 communication wires of MCU
- A single module can drive an 8 * 8 common cathode LED
₹128.00 Incl. of GSTMAX7219 Dot Led Matrix Module – 8×8 MCU Control
₹128.00 Incl. of GSTSKD502T – N Channel Mosfet – TO-220
- Drain-Source Voltage (VDS): 85V
- Low On-Resistance (RDS(on)): 4.6mΩ (typical)
- Continuous Drain Current (ID): 120A
- Pulsed Drain Current (ID,pulse): 480A
- Power Dissipation (Ptot): 174W
- Package: TO-220
₹44.85 Incl. of GSTSKD502T – N Channel Mosfet – TO-220
₹44.85 Incl. of GST100K Ohms Rotary Potentiometer 12mm – Knob Height 20mm
- Rotational Angle: 300° ± 10°.
- Size: 12mm compact form factor.
- Resistance Value: 100KΩ.
- Knob height: 20mm
- Rotational Torque: Smooth adjustment range for precise control.
- Mounting Style: PCB or panel mount.
- Resistance Tolerance：±10%
₹28.00 Incl. of GST100K Ohms Rotary Potentiometer 12mm – Knob Height 20mm
₹28.00 Incl. of GSTInductor 120uH – 5.2×5.8×4.5mm – CD54 – SMD
- Inductance: 120 µH ± 10%
- Rated Current: 0.45A
- Temperature storage range： -10℃~70℃
- relative humidity：RH65%~85%
- DC Resistance(Ω)Max: 0.85
- L×W×H: 5.2×5.8×4.5mm± 0.5mm
- Part No.: JCD54-121K
₹9.50 Incl. of GSTInductor 120uH – 5.2×5.8×4.5mm – CD54 – SMD
₹9.50 Incl. of GSTArduino Uno R3 Compatible Board With Cable – DIP Version
- Arduino Uno DIP Version Compatible Module
- 32 KB Flash
- 2 KB SRAM
- 1 KB EEPROM
- Frequency: 16 Mhz
₹590.00 Incl. of GSTArduino Uno R3 Compatible Board With Cable – DIP Version
₹590.00 Incl. of GSTMP4560 DC DC 8-55V to 5V 2A Step Down Module – Fixed Output
- Input Voltage (VIN): 8V to 55V
- Output Voltage (VOUT): 5V
- Output Current (IOUT): Up to 2A
- Efficiency: Up to 95%
- Quiescent Current: 140μA (typical)
- Switching Frequency: Up to 2MHz
₹180.00 Incl. of GSTMP4560 DC DC 8-55V to 5V 2A Step Down Module – Fixed Output
₹180.00 Incl. of GSTSTM32F446RET6 MCU IC – ST – Arm Cortex-M4 – 32-bit MCU+FPU – LQFP-64
- Operating voltage: 1.8.0V to 3.6V
- CPU frequency: 180Mhz
- GPIOs: 50
- Flash memory: 512kb
- SRAM: 128Kb
- : LQFP-64
- Interfaces: CAN, I2C, SPI, USART, USB
₹490.00 Incl. of GSTSTM32F446RET6 MCU IC – ST – Arm Cortex-M4 – 32-bit MCU+FPU – LQFP-64
₹490.00 Incl. of GSTTB6612FNG Motor Driver Module
- Power supply voltage: VM=15V (Max.)
- Output current: Iout=1.2A (ave) / 3.2A (peak)
- Output low ON resistor: 0.5Ω (upper + lower Typ. @ VM ≥ 5V)
- Standby (Power save) system
- CW/CCW/short brake/stop function modes
- Built-in thermal shutdown circuit and low voltage detecting circuit
- Response to Pb-free packaging
₹194.00 Incl. of GSTTB6612FNG Motor Driver Module
₹194.00 Incl. of GSTXM25QH64AHIG IC- 64MBit – 3V – Serial Flash Memory with Dual/Quad SPI & QPI – SOP-8L
- Memory Capacity: 64M-bit (8MByte)
- Interface: Supports Standard, Dual, Quad SPI, and QPI
- Clock Speed: Up to 133MHz (Single/Dual/Quad SPI)
- Operating Voltage: 2.3V to 3.6V
- Data Retention: Over 20 years
- Ultra-Low Power: 1µA in Ultra Deep Power-Down Mode
- Temperature Range: -40°C to +105°C
₹37.10 Incl. of GST