300 RPM Dual Shaft BO Motor – Straight
- Motor Type: Dual Shaft BO Motor
- Shaft length: 8mm
- Shaft Diameter: 5.5 mm
- Size: 70 x 22 x 35mm.
- Operating Voltage: 3 to 12V.
- Current (without loading): 40-180mA.
- RPM:300 rpm.
- Output Torque: 1 kg cm.
₹52.00 Incl. of GST300 RPM Dual Shaft BO Motor – Straight
₹52.00 Incl. of GST220nF 50V Multi Layered Ceramic Capacitor (MLCC) – X7R – SMD 1206 – Yageo CC1206KKX7R9BB224
- Capacitance: 220nF
- Voltage Rating: 50V
- Dielectric: X7R
- Tolerance: ±10%
- Package Size: SMD 1206
- RoHS Compliant & Lead-Free
- Manufacturer : Yageo
- MPN: CC1206KKX7R9BB224
₹1.95 Incl. of GSTXinya XY2500 9 Pin Male RT + Female RT 5.08mm Pitch
- Xinya XY2500 Male Right Angle + Female Right Angle Connector Set
- Can work with upto 2.5 sq. mm
- Pitch: 5.08mm
- Current Rating: 12A @ 250V AC
- Wire Cage: Brass(Nickel Plated) or Steel(Zinc Plated)
₹42.00 Incl. of GSTXinya XY2500 9 Pin Male RT + Female RT 5.08mm Pitch
₹42.00 Incl. of GSTMP2315 DC DC Adjustable Step Down Module – Adjustable and Fixed Output
- Supply Voltage (VIN): 4.5V to 24V
- Output Voltage (VOUT): Adjustable, 12V, 9V, 5V, 3.3V, 2.5V, 1.8V
- Operating Junction Temperature (TJ): -40°C to +125°C
- Enable PIN
- Load Current: Up to 3A
- Low Quiescent Current
- Switching Frequency: Fixed 500kHz
₹71.95 Incl. of GSTMP2315 DC DC Adjustable Step Down Module – Adjustable and Fixed Output
₹71.95 Incl. of GST680uF 25V SMD Electrolytic Capacitor – 10 x 10.2 mm – 20%
- Capacitance: 680uF
- Voltage: 25V
- Type: Aluminum Electrolytic SMD
- Capacitor dimensions (each): 10 x 10.2 mm
₹12.00 Incl. of GST680uF 25V SMD Electrolytic Capacitor – 10 x 10.2 mm – 20%
₹12.00 Incl. of GSTK type Thermocouple Sensor – 600° C
- Temperature range: up to 600°C
- Accuracy: ±2.2°C or ±0.75% of reading
- Response time: typically less than 1 second
- Sensor diameter: 5mm
- Cable length: 1 meter
₹40.00 Incl. of GSTK type Thermocouple Sensor – 600° C
₹40.00 Incl. of GSTESP32 Programmer Board
- Supports ESP32 and ESP8266
- Can support any MCU that needs BOOT & RESET control
- USB-C Type Interface
- LEDs for Power, RX, TX
- Switch for Reset and Boot
- Both 3.3V and 5V available on the O/P connector
₹519.00 Incl. of GSTESP32 Programmer Board
₹519.00 Incl. of GST1.3 Inch OLED Display – I2C – IIC – 128×64 – Blue Colour
- Chip: SH1106
- Interface: I2C
- Power Supply: 3.3V-5V
- Display: Graphic LCD, 1.3” in width, with a resolution of 128×64 dots
- Display Colors: BLUE
- Current Consumption: 8 mA when fully operational
₹320.00 Incl. of GST1.3 Inch OLED Display – I2C – IIC – 128×64 – Blue Colour
₹320.00 Incl. of GSTK-Type Thermocouple Temperature Sensor – 600° C
- Connector Type: K Type
- Measuring range: 0 to 600 C
- Cable Length: 0.5 Meter
- Interface Type: flat plug-in
- Interface Length: 12.5MM
- Accuracy : 2.5%/0.75%
₹42.80 Incl. of GSTK-Type Thermocouple Temperature Sensor – 600° C
₹42.80 Incl. of GST201 7 pin Female Connector – 2mm Pitch – PH Series Compatible
- Current Rating: 2 A
- Voltage Rating: 100 V
- Pitch: 2 mm
- Pins: 7
- Type: Female Connector
- Compatible with JST PH 2mm
₹0.57 Incl. of GST201 7 pin Female Connector – 2mm Pitch – PH Series Compatible
₹0.57 Incl. of GSTSMBJ51CA TVS Diode – Bidirectional – SMB (DO-214AA)
- Break Down Voltage VBR: 62.7V(Max)
- Maximum Clamping Voltage (V): 82.4V
- Maximum Reverse Stand-Off Voltage (V): 51V
- Peak pulse current Ipp: 7.3A
- Maximum Reverse Leakage Current (uA): 5uA
- Direction Type: Bi-Directional
₹3.36 Incl. of GSTSMBJ51CA TVS Diode – Bidirectional – SMB (DO-214AA)
₹3.36 Incl. of GSTAutomatic Hand Sanitizer Dispenser Kit
- Automatic Sanitizer Dispenser Kit
- Operating Voltage: 12V DC
- Current Required: 400 mA Max, 100 mA Continuous
- Sanitizer Output: 2-3 ml on each trigger
- Buzzer Plays on a trigger
- Alternate Product : Solderless Sanitizer Dispenser Kit
₹1,119.82₹1,534.00Incl. of GSTAutomatic Hand Sanitizer Dispenser Kit
₹1,119.82₹1,534.00Incl. of GST