No products in the cart.
Xinya XY2500 10 Pin Open Type Male Terminal – Straight
- XY2500 Open Type 10 Pin Male – Straight
- Current Rating: 12A @ 250V AC
- Pitch: 5.08mm
- High Quality
- Can be used with up to 2.5 sq. mm wire
₹23.90 Incl. of GSTXinya XY2500 10 Pin Open Type Male Terminal – Straight
₹23.90 Incl. of GST12V MPPT Solar Charge Controller for 3S Lithium ion Battery
- Input voltage: nominally about 18V solar panel (no-load 21V solar panel)
- Output Voltage: Nominal 12V (10.8 11.1V) Fully Charged Voltage 12.6V Lithium Battery 3 string lithium battery charge management
- Output current: maximum constant current 3A (charge current greater than 2A please add heat)
- Wiring method: pad
₹389.00₹566.40Incl. of GST12V MPPT Solar Charge Controller for 3S Lithium ion Battery
₹389.00₹566.40Incl. of GST47uF 35V Tantalum Capacitor – SMD – Case E – AVX
- Solid Electrolyte Capacitors
- 100% Surge Current Tested
- CV Range: 47uF / 35V
- Power Supply Applications
- Tolerance: 10%
- ESR: 0.5 ohms
- Package: Case E
- Make: AVX
- MPN: TAJE476K035RNJ
₹24.70 Incl. of GST47uF 35V Tantalum Capacitor – SMD – Case E – AVX
₹24.70 Incl. of GST11 Pin JST XH Male Right Angle Connector – 2.54mm Pitch
- Current Rating: 3 A
- Voltage Rating: 250 V
- Pitch: 2.54 mm
- Pins: 11
- Type: Male Right Angle Connector
- Series: 2515
₹5.45 Incl. of GST11 Pin JST XH Male Right Angle Connector – 2.54mm Pitch
₹5.45 Incl. of GSTJLink V9 Debugger Emulator – ARM MCU Development Tool
- The main control chip adopts STM32F205, not lose firmware, and the hardware is upgraded to the latest version of V9.4
- Can provide 3.3V and 0.8A current for the development board (pin 2)
- Support standard JTAG interface and 2-wire SWD debugging interface. The speed can reach 20M (JTAG) / 15M (SWD) per second.
- Support debugging of all ARM chips, support MDK or IAR, and compile environment IDE supported by other standard JLink.
- Original firmware, full automatic upgrade The main control chip adopts STM32F205, without losing the firmware, and the hardware is upgraded to the latest version of V9.4
₹2,550.00 Incl. of GSTJLink V9 Debugger Emulator – ARM MCU Development Tool
₹2,550.00 Incl. of GSTInductor 56uH – 5.2×5.8×4.5mm – CD54 – SMD
- Inductance: 56 µH ± 10%
- Rated Current: 0.70A
- Temperature storage range: -10℃~70℃
- relative humidity:RH65%~85%
- DC Resistance(Ω)Max: 0.40
- L×W×H: 5.2×5.8×4.5mm ± 0.5mm
- Part No.: JCD54-560K
₹9.50 Incl. of GSTInductor 56uH – 5.2×5.8×4.5mm – CD54 – SMD
₹9.50 Incl. of GST6.3mm Diameter Nozzle – 1 Feet Length
- Diameter: 6.3mm
- Length: 1 Feet
- 1 Qty = 1 Feet
₹5.90 Incl. of GST6.3mm Diameter Nozzle – 1 Feet Length
₹5.90 Incl. of GSTNodeMCU Esp32s- Esp32 Wroom 32 MCU Module – 38 Pin
- ESP32-WROOM-32 Based Development board
- It supports WiFi, Bluetooth, Bluetooth Low Energy
- Dual Core MCU
- Clock Frequency of upto 240 Mhz
- Upto 512 KB RAM
- Available Peripherals: Capactive Touch, ADCs, DACs, UART, SPI, I2C and more
- Available Pins: 38
₹402.00 Incl. of GSTNodeMCU Esp32s- Esp32 Wroom 32 MCU Module – 38 Pin
₹402.00 Incl. of GST20 Pin JST XH Male Connector – 2.54mm Pitch
- Current Rating: 3 A
- Voltage Rating: 250 V
- Pitch: 2.54 mm
- Pins: 20
- Type: Male Connector
- Series: 2515
₹7.10 Incl. of GST20 Pin JST XH Male Connector – 2.54mm Pitch
₹7.10 Incl. of GSTPN532 NFC RFID Read Write Module Kit V3
- Operating Voltage: 3.3V – 24V (TTL level for I2C/UART), 3.3V (TTL for SPI)
- Interface: I2C, SPI, High-Speed UART (HSU)
- Communication Distance: 5cm to 7cm (NFC and RFID)
- PCB Antenna: Built-in, providing 4cm to 6cm communication range
- Works as an NFC device or RFID reader/writer
₹268.00 Incl. of GSTPN532 NFC RFID Read Write Module Kit V3
₹268.00 Incl. of GSTSMBJ60CA TVS Diode – Bidirectional – SMB (DO-214AA)
- Break Down Voltage VBR: 73.7V(Max)
- Maximum Clamping Voltage (V): 96.8V
- Maximum Reverse Stand-Off Voltage (V): 60V
- Peak pulse current Ipp: 6.2A
- Maximum Reverse Leakage Current (uA): 5uA
- Direction Type: Bi-Directional
₹3.36 Incl. of GSTSMBJ60CA TVS Diode – Bidirectional – SMB (DO-214AA)
₹3.36 Incl. of GST