20 Pin JST XH Female Cable – Single Side – 11 inch
- 20 Pin 2515 JST XH Female Cable – Single Side Female
- Pitch: 2.54 mm
- Wire Gauge: 7/40
- Cable Length: 11 inch
₹30.70 Incl. of GST20 Pin JST XH Female Cable – Single Side – 11 inch
₹30.70 Incl. of GSTXinya XY2500 10 Pin Open Type Male Terminal – Straight
- XY2500 Open Type 10 Pin Male – Straight
- Current Rating: 12A @ 250V AC
- Pitch: 5.08mm
- High Quality
- Can be used with up to 2.5 sq. mm wire
₹23.90 Incl. of GSTXinya XY2500 10 Pin Open Type Male Terminal – Straight
₹23.90 Incl. of GSTHeat Shrink Sleeve 1mm White
- Color: White
- Diameter: 1 mm
- Length: 1 Meter
- Shrink Ratio: 2:1
- Material: Polyolefin
- Shrink Temperature: 90° C
- Make: WOER
₹4.90 Incl. of GSTHeat Shrink Sleeve 1mm White
₹4.90 Incl. of GST47uF 35V Tantalum Capacitor – SMD – Case E – AVX
- Solid Electrolyte Capacitors
- 100% Surge Current Tested
- CV Range: 47uF / 35V
- Power Supply Applications
- Tolerance: 10%
- ESR: 0.5 ohms
- Package: Case E
- Make: AVX
- MPN: TAJE476K035RNJ
₹24.70 Incl. of GST47uF 35V Tantalum Capacitor – SMD – Case E – AVX
₹24.70 Incl. of GST11 Pin JST XH Male Right Angle Connector – 2.54mm Pitch
- Current Rating: 3 A
- Voltage Rating: 250 V
- Pitch: 2.54 mm
- Pins: 11
- Type: Male Right Angle Connector
- Series: 2515
₹5.45 Incl. of GST11 Pin JST XH Male Right Angle Connector – 2.54mm Pitch
₹5.45 Incl. of GSTLM3914 Dot Bar Display Driver IC – DIP-18
- Supply Voltage: 25V
- Voltage on Output Drivers: 25V
- Package/Case: DIP-18
- Storage Temperature Range: −55°C to +150°C
₹42.00 Incl. of GSTLM3914 Dot Bar Display Driver IC – DIP-18
₹42.00 Incl. of GSTJLink V9 Debugger Emulator – ARM MCU Development Tool
- The main control chip adopts STM32F205, not lose firmware, and the hardware is upgraded to the latest version of V9.4
- Can provide 3.3V and 0.8A current for the development board (pin 2)
- Support standard JTAG interface and 2-wire SWD debugging interface. The speed can reach 20M (JTAG) / 15M (SWD) per second.
- Support debugging of all ARM chips, support MDK or IAR, and compile environment IDE supported by other standard JLink.
- Original firmware, full automatic upgrade The main control chip adopts STM32F205, without losing the firmware, and the hardware is upgraded to the latest version of V9.4
₹2,550.00 Incl. of GSTJLink V9 Debugger Emulator – ARM MCU Development Tool
₹2,550.00 Incl. of GST3.3nF 50V Multi Layered Ceramic Capacitor (MLCC) – X7R – SMD 1206 – Yageo CC1206KRX7R9BB332
- Multi Layered Ceramic Capacitor
- Max Voltage: 50V
- Capacitance: 3.3nF
- Dielectric Type: X7R
- Package: SMD 1206
- Manufacturer : Yageo
- MPN : CC1206KRX7R9BB332
₹1.50 Incl. of GSTInductor 56uH – 5.2×5.8×4.5mm – CD54 – SMD
- Inductance: 56 µH ± 10%
- Rated Current: 0.70A
- Temperature storage range： -10℃~70℃
- relative humidity：RH65%~85%
- DC Resistance(Ω)Max: 0.40
- L×W×H: 5.2×5.8×4.5mm ± 0.5mm
- Part No.: JCD54-560K
₹9.50 Incl. of GSTInductor 56uH – 5.2×5.8×4.5mm – CD54 – SMD
₹9.50 Incl. of GSTPN532 NFC RFID Read Write Module Kit V3
- Operating Voltage: 3.3V – 24V (TTL level for I2C/UART), 3.3V (TTL for SPI)
- Interface: I2C, SPI, High-Speed UART (HSU)
- Communication Distance: 5cm to 7cm (NFC and RFID)
- PCB Antenna: Built-in, providing 4cm to 6cm communication range
- Works as an NFC device or RFID reader/writer
₹268.00 Incl. of GSTPN532 NFC RFID Read Write Module Kit V3
₹268.00 Incl. of GSTMG90S Micro Servo Motor – 180° Rotation
- Model: MG90S
- Operating voltage: 4.8V~ 6.6V
- Servo Plug: JR
- Stall torque @4.8V : 1.8kg-cm
- Stall torque @6.6V : 2.2kg-cm
- Rotational Degree: 180
₹113.00 Incl. of GSTMG90S Micro Servo Motor – 180° Rotation
₹113.00 Incl. of GST6.3mm Diameter Nozzle – 1 Feet Length
- Diameter: 6.3mm
- Length: 1 Feet
- 1 Qty = 1 Feet
₹5.90 Incl. of GST6.3mm Diameter Nozzle – 1 Feet Length
₹5.90 Incl. of GST
Get Lightning Fast dispatch on all orders without any extra charge. And avail GST credit on all your purchases.