No products in the cart.
Hi Link B0505S-2WR3 – 2W – Isolated Unregulated Single Output DC-DC power module
- Input Current (Full/No Load): 454mA / 5mA (typical)
- Load Regulation: 12% (typical for 5V output)
- Output Voltage Accuracy: ±15%
- Ripple & Noise: 30-80 mVp-p
- Maximum Capacitive Load: 2400µF
- Switching Frequency: ~100kHz
- Storage Temperature: -40°C to +125°C
₹109.00 Incl. of GSTHi Link B0505S-2WR3 – 2W – Isolated Unregulated Single Output DC-DC power module
₹109.00 Incl. of GSTMIC29302WU-TR – Linear Adjustable Voltage Regulator – TO263-5 – Microchip
- Make: Microchip
- High-Current Capability
- Max Output Current: 3A
- Operating Input Voltage Range: 3V to 26V
- 1.25V to 25V Adjustable Output Voltage
- Low Dropout Voltage
- Packages: TO-263-5L
₹111.50 Incl. of GSTMIC29302WU-TR – Linear Adjustable Voltage Regulator – TO263-5 – Microchip
₹111.50 Incl. of GSTTDA7375 ZIP15
- High output power capability
- Operating supply voltage: 18V
- Dc supply voltage: 28V
₹129.99 Incl. of GSTTDA7375 ZIP15
₹129.99 Incl. of GSTMAX3485ESA RS485 / RS422 Transceiver – SOP8 – Maxim
- RS485 / RS422 Transceiver
- Operating Voltage: 3.0V to 3.6V
- Interoperable with 5V Logic
- Supports upto 32 Transceivers on Bus
- Data Rate: 10 Mb/s
- -7V to +12V Common-Mode Input Voltage Range
₹132.90 Incl. of GSTMAX3485ESA RS485 / RS422 Transceiver – SOP8 – Maxim
₹132.90 Incl. of GSTSTM32F103C8T6 Microcontroller – Arm Cortex-M3 Based MCU
- STM32F103C8T6 MCU from STM
- Arm Cortex M3 Based CPU
₹144.00₹357.42Incl. of GSTSTM32F103C8T6 Microcontroller – Arm Cortex-M3 Based MCU
₹144.00₹357.42Incl. of GSTCP2102 IC – Usb to Uart Bridge – QFN-28 – 5×5 mm – Silabs – CP2102-GMR
- Supply Voltage:
– Self-powered: 3.0 to 3.6 V
– USB bus powered: 4.0 to 5.25 V - Package: Lead free 28-pin QFN (5 x 5 mm)
- Single-Chip USB to UART Data Transfer
- USBXpress™ Direct Driver Support
- Virtual COM Port Device Drivers
- USB Function Controller
- Make: Silabs
- MPN: CP2102-GMR
₹144.90 Incl. of GSTCP2102 IC – Usb to Uart Bridge – QFN-28 – 5×5 mm – Silabs – CP2102-GMR
₹144.90 Incl. of GST- Supply Voltage:
BTS7960 Motor Driver IC – 43A H-Bridge – High-Power – TO263-7 – Generic
- MPN: BTS7960
- Make: Generic
- Continuous Current: 43A per channel
- Operating Voltage: 5.5V – 27V
- Control Signal Voltage: 3.3V or 5V logic compatible
- PWM Frequency: Up to 25kHz
- Protection: Overtemperature and overcurrent protection
₹145.00 Incl. of GSTBTS7960 Motor Driver IC – 43A H-Bridge – High-Power – TO263-7 – Generic
₹145.00 Incl. of GSTAQY211EH – 30V 1A Solid State Relay – DIP-4
- Load Output Voltage: 30V
- Load Output Current: 1A
- Total Power Dissipation: 550mW
- Operating Temperature: -40°C to 85°C
- Turn ON Time: 5ms(max)
- Turn OFF Time: 1ms(max)
₹148.00 Incl. of GSTAQY211EH – 30V 1A Solid State Relay – DIP-4
₹148.00 Incl. of GSTMCP23017T-E/SO – 16-Bit I/O Expander – Microchip – SOIC-28
- Manufacturer: Microchip Technology
- Part Number: MCP23017T-E/SO
- Interface: I²C (Two-wire serial)
- Number of I/O Pins: 16 GPIO
- Operating Voltage: 1.8V to 5.5V
- Maximum I²C Speed: 1.7 MHz
- Interrupt Outputs: 2 (INTA, INTB)
- Operating Temperature: –40°C to +85°C
- Package Type: SOIC-28 (SMD)
- Logic Compatibility: 3.3V and 5V systems
₹152.00 Incl. of GSTMCP23017T-E/SO – 16-Bit I/O Expander – Microchip – SOIC-28
₹152.00 Incl. of GSTLSM6DSL IC 6-Axis – 3D Accelerometer + 3D Gyroscope – ST – LGA14 – 3×2.5mm
- Operating Voltage: 1.71V – 3.6V
- I/O Voltage: 1.62V
- Current Consumption:
- ~0.4 mA (normal mode)
- ~0.65 mA (high-performance mode)
- FIFO Size: 4 KB
- Interface: I²C / SPI
- Package Type: LGA-14
- Make: ST
₹155.00 Incl. of GSTLSM6DSL IC 6-Axis – 3D Accelerometer + 3D Gyroscope – ST – LGA14 – 3×2.5mm
₹155.00 Incl. of GSTAtmega328p-AU MCU IC – SMD – TQFP-32
- Atmel MCU
- Atmega328p-AU
- 32 KB Flash
- 2 KB RAM
- 1 KB EEPROM
₹161.00₹249.99Incl. of GSTAtmega328p-AU MCU IC – SMD – TQFP-32
₹161.00₹249.99Incl. of GSTMP2617BGL IC – 3A Switching Battery Charger IC Power Path Management – MPS – QFN-20
- Operating Input Voltage Range: 4.0V to 10.0V
- Switching Frequency: 1.6 MHz (Typ), with a range from 1.4 MHz to 1.8 MHz
- Input Current Limit Options: USB2.0 (450mA), USB3.0 (825mA), Default Mode (2000mA), and Programmable Mode
- Quiescent Current: Charger enabled (up to 5mA), disabled mode (3-5µA)
- SYS Output Regulation Voltage: 3.6V (Typ) for VBATT ≤ 3.4V and programmable up to 4.63V
- Package: SMD QFN-20 (3mmX4mm)
₹171.00 Incl. of GSTMP2617BGL IC – 3A Switching Battery Charger IC Power Path Management – MPS – QFN-20
₹171.00 Incl. of GST